FRS6LF7JM3 Frigidaire Refrigerator - Instructions

push side clips into corner and slowly push shelf down and "Presto" shelf installed

1. Remove all food and drinks from door. 2. Remove all shelves from door. 3. Remove plastic hinge cover on top by unscrewing one phillips head screw. 4. Remove hinge by unbolting two bolts with a socket wrench. 5. Hold on to the door when you get the last bolt out! 6. Lift off the top hinge. 7. Lift the door off the bottom hinge. 8. Lay the door gently on the floor. 9. Remove broken hinge bearing from bottom of door with needlenose pliers. 10. Insert new hinge bearing. 11. Place door back onto bottom hinge (extra set of hands helpful). 12. Place top hinge back into door. 13. Line up bolt holes on top of fridge. 14. Insert and tighten bolts. 15. Snap on and screw on plastic hinge cover. 16. Enjoy smooth moving, tight closing door!

Removed the drawer rails from the shelf, installed the new ones. Viola!

Slid new one into door. Diagram on website for ordering parts was easy to follow. Part easy to order and arrived in a timely fashion.

Out of the box and slipped right in on the door. Part was here in 3 days. Excellent service.

snap drawer in place

Ordered one day, got it the next, popped right in place. Identical part, super service.

installed new door bin

At first I thought I ordered the wrong cover for my refrigerator but when I removed the electronic from the old one I realized it was the right one. I had to remove the facing from the old one and reapply it to the new one. After that the rest was easy.

removed meat drawer ,,,titled on it;s side , used philip screw drivingto lossen screw ,,removed worn rail and replaced it with new one in less then a minute,,, very easy and cool ,,,

Received the parts promptly and did the repair just as the video showed. All went well and had the repair completed in 10 minutes. For me that was remarkable because I have two left hands! Would highly recommend partselect.com

pulled off the grill, emptied the door, unscrewed the hinge plate, lifted the door up and off, replaced the hinge parts, reinstalled the door. easy peasy. worked great. by the way. I received the parts by ups within 24 hours of ordering them online, standard shipping!

Everything went according to plans and as expected. It could not have gone any easier. Customer service was outstanding! I will certainly use your service again.

First off make sure you have a good quality Phillips screw driver. When the blade is worn out you can disassemble the ice maker with out removing the front. But to reassemble the front cover must be removed. Do yourself a favor and buy the drum and nut also. I am a mechanic by trade so the tools and repair was really easy. Be careful of the ice crusher BLADES they are very sharp. If your not mechanically inclined take pictures before disassembly, that will help you greatly. Hope this helps someone. Thanks Rory

Used a nut driver to remove the small panal from the back of the refrigerator. Removed the two screws holding the valve in place. Unscrewed the water lines from the old valve and cut the ends off of them. Push the water lines back into the new valve. Unpluged the wiring from the old valve and installed them in the new valve. reinstalled the new valve and put the cover back on. Tested system for proper operation.