All Installation Instructions for Frigidaire Refrigerator FRS26LF7DS7

Ice maker not making ice -

I followed the directions from the u tube video. He made it look so easy, but it was quite difficult to locate and unscrew the nuts holding the ice maker to the side of the freezer. I got super frustrated. That is what took the longest. Also got burned when taking out the old assembly as the bottom was hot. Other than that it was pretty simple and the best thing is that I have ice!

Parts Used:

Icemaker Assembly

Barbara from Somerset, KY
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Rails had cracked and drawer would not open without being held with a hand under it.

Took drawer out, took shelf out. Took old rails off shelf, put new rails on. Very Easy!

Parts Used:

Meat Drawer Rail - Right Side

Meat Pan Rail - Left Side - White

Patricia from Prairie Grove, AR
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

the drive blade for ice maker was rusted

first copy the explored view of all the parts ' ice maker tray ' then just take it apart slowly you need to get the blades back in the correct order and position thats what the exploded view is for in case you forget then you replace the blade and reassemble , it take a good hour .

Parts Used:

DRIVE BLADE

Michael from Philadelphia, PA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

The ice maker quit producing ie

Purchased a new ice maker assembly and installed. Very easy

Parts Used:

Refrigerator Ice Maker Assembly

Tommie from Port Lavaca, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Broken shelves

Easy to install (self explanitory)

Parts Used:

Crisper Cover Support - Front

Crisper Support - Rear

Pamela from Brooklyn, NY
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins

Was this instruction helpful to you?

Thank you for voting!

Upper Crisper Pan was cracked

I replaced broken tray with new one.

Parts Used:

Refrigerator Crisper Drawer

Michael from Bethlehem, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

no ice

instructions were very simple. Took about 10 minutes to replace the unit. Do NOT get excited about immediate ice because it took mine awhile to g et cranked up for full production. Anyone can do this! Saves about $150.00 in labor to have someone(no smarter than you) do it for you.

Parts Used:

Replacement Ice Maker

Larry from Plains, KS
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver

Was this instruction helpful to you?

Thank you for voting!

Botton door bin was broken.

Simple replacement. Fit perfectly.

Parts Used:

Refrigerator Door Bin

DEBRA from EDMOND, OK
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

frost build up in side on the back of the freezer .and my my filter housing cup crack due to ice build up inside .freezer side not to cold and fridge side to cold freezer and fridge side to factory settings

before I started a check and tested the defrost thermostat and the evaporator fan this one was working .a did check the heating coil system with a digital multimeter tested ok, at the end find out that the thermostat was not working. I put a new one. I just notice after few days some frost is on the wall of the freezer side .can some one help I don't know what else to do .can be the defrost timer .but how you test the one on this model. this one electronic thank you

Parts Used: