FFT6009 Frigidaire Washer - Parts

Drive V-Belt

★★★★★

★★★★★

(28)

This rubber V-style drive belt slips on the motor pulley to bring the basket to the required speed. If you notice a burning rubber smell or grinding noises coming from your washer, your washer does no... Add to cart

Water Inlet Valve

★★★★★

★★★★★

(12)

The water inlet valve has two ports for water to enter and controls the flow of water into a washing machine. Hot, cold, and warm water can easily enter the washer this way. If the water inlet valve i... Add to cart

Tension Idler Pulley

★★★★★

★★★★★

(5)

The idler pulley on your washing machine allows the drive belt to operate smoothly. If your washer is not spinning or agitating, makes too much noise, or you notice a burning smell when it is operatin... Add to cart

Washer Lid Lock with External Safety Switch

★★★★★

★★★★★

(1)

Mounting bracket on this part replaces old style ( You may need to drill off old bracket before mounting new lock).

Spin Bearing

★★★★★

★★★★★

(1)

The spin bearing, used for your washer, is located at the bottom of the outer tub near the transmission. The spin bearing carries the transmission shaft in the drive system, therefore ensuring the sha... Add to cart

Lid Strike - White

★★★★★

★★★★★

(1)

This part is used to activate the lid switch when the lid opens/closes. Add to cart

Direct Drive Pump This pump sucks the water out of your washers tub with one of its valves, and drains the water into a drain hose with the other valve.

Water Inlet Hose Assembly This water inlet hose is used in washers. The hose connects the washer water inlet valve to the water supply in your home. There are two solenoids on the valve, which are referred to as coils, and the...

Splash Cover Seal The tub ring seal or splash cover seal is used for washers. This part seals the tub cover to the outer one and prevents water leakage from around the tub ring. If your seal is damaged and you are expe... Add to cart

Transmission to Tub Seal Kit

★★★★★

★★★★★

(1)

This is a transmission to tub seal kit, often referred to as a center tub seal kit, and it is used in washing machines to create a seal between the transmission and the tub. This seal works to prevent... Add to cart

Pump Slinger This part is found between the pump and the motor shield and its purpose is to make sure that nothing leaks down the shaft into the transmission. Replace if washer is leaking.

Horizontal Spring This is a horizontal spring, but you may know it as a suspension spring, and it is a part for your washing machine. Its function is to stabilize the outer tub by keeping it balanced. In order to make ...