Quick Question!

Have you ever purchased from PartSelect.com before?

Models > FER641FS0 > Parts

FER641FS0 Frigidaire Dryer - Parts

All parts for the Frigidaire Dryer FER641FS0

Below is a list of all parts for the Frigidaire Dryer FER641FS0 - Residential. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the FER641FS0
15-28 of 95
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$17.23

Timer Knob - White with Gray Grip

Sold individually. This knob accepts a D-shaped shaft.

$8.32

Door Strike

The door strike is attached to the door of your dryer and holds the door closed. If your dryer door is not closing, this might be due to the door strike needing to be replaced. This is a simple repair that should only take a few minutes to complete. The package contains one strike. Open the dryer door, and use a flat head screw driver to snap the old strike out if it has not fallen out already. Simply push the gasket out of the way, squeeze together the strike and place inside of the opening. Wiggle to ensure it is set in place properly.

$8.61

Grounding Ball

This grounding ball is used in dryers and works to prevent friction in the rear bearing when the drum rotates. If your dryer is making a squealing, loud, banging noise or will not ...

$118.79

Drive Motor with Pulley

This motor has a double shaft.

$29.81

Idler Arm Assembly

Part may differ in color from image. Please note that this is only a cosmetic difference.

$30.30

Door Handle

$9.58

Adjustable Leveling Foot - Black

This part could be found underneath a fridge, dryer, or freezer. The original foot may be cracked, broken, or perhaps missing altogether. If you notice the appliance is uneven to t...

$32.16

Upper Front Felt Seal

$7.88

Grounding Ball Clip

This grounding ball clip is made of metal. Sold individually.

$6.55

SCREW

Sold individually.

$6.23

SCREW

$28.85

High Temperature Adhesive

This high temperature adhesive is used for installing felt and rubber seals on dryers. The tube contains 1 ounce of product. This adhesive is made to withstand extremely hot temperatures. Before applying the adhesive, ensure that the area is completely clean from any debris and is dry. You may wish to use small clamps to hold the material in place while it dries. If the felt has come loose or broken apart, this may cause your dryer to make loud noise, indicating that new felt or rubber needs to be glued into place. Use gloves to apply glue.

$35.22

Seal

Adhesive is sold separately.

$28.60

Terminal Block Kit

This kit includes 3 screws and 3 terminals.

All Parts for the FER641FS0
15-28 of 95