FCE10610A Jenn-Air Range - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Light bulb failure
Received the part the day after ordering. Appreciated the quick service and repair took less than a minute.
Parts Used:
-
Grant from Alexandria, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
oven temp would not heat above 100º
removed old element - replaced with new element - perfect fit Thank you Part Select fast delivery easy installation by using part select online instructions.
Parts Used:
-
Joseph from Malvern, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Oven not heating
First I turned off power to the range. I then removed the oven door for easier access to the rear of the oven. I removed baking pans and 2 oven racks. With a nut driver, I unscrewed the holding screws attached to the rear of oven heating element. Then pull the element forward exposing wire push-on connectors and slide connectors off the element. Reverse the entire procedure, set oven temperature to about 350 degrees to check element function and voila! bake some cookies.
Parts Used:
-
Dennis from Brewster, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
drip pan were burnt out
simply remove the burner take out the drip pan and bowl individually. Install the new one and replace the burner. no tool was used.
Parts Used:
-
Delroy from Miramar, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!