Models > ESS22XGMDBB > Instructions

ESS22XGMDBB General Electric Refrigerator - Instructions

All Instructions for the ESS22XGMDBB
1726 - 1739 of 1739
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
fluctuating temperatures on both the refrigerator and freezer
followed video
Parts Used:
Main Electronic Control Board
  • John from Seaford, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Refrigerator was only dispensing crush ice and not cubes
Solenoid pushing the crushed ice flapper was burned out. Solenoid was easy to find unplug and replace. I used the old piston which simplified things. Now works great
Parts Used:
Ice Dispenser Solenoid Service Kit
  • Charles from Spring, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
fresh food side did not get cold
the parts I ordered did not fix the problem the problem was with repairman did not follow the instruction and cut jumper wire on main control board
Parts Used:
Defrost Thermostat
  • Walter from Upper Marlboro, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Refrigerator not cooling.
Unplugged power cord, removed back panel, disconnected wires, removed existing control board, installed new control board, reconnected wires, replaced back panel, plugged in power cord. The video instructions made it really easy. Saved at least $100.00 doing it myself. Awesome!
Parts Used:
Main Electronic Control Board
  • Rene from Canyon Country, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
Was this instruction helpful to you?
Thank you for voting!
Flapper valve allowing frost/ice to accumulate in chute in summer
Followed the online video exactly and it was easily done. Couldn't have been better. The problem is solved.
Parts Used:
Dispenser Door Assembly or Flapper
  • Richard from Dumfries, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Flapper in door for ice dispenser would not close.
I repaired IAW the PartSelect video. Very easy. One thing that should be mentioned in the troubleshooting process, is to check the retention spring on the flapper. That spring could come off and also cause the flapper not to close.
Parts Used:
Dispenser Door Solenoid Assembly
  • Clyde from San Antonio, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
The defrost heater for the refrigerator stopped working. The 'fridge was turning into a really pathetic cooler!
I did exactly what the instructions on the e-mail stated and saved myself about 350.00! Thanks so much for the incredible service instructions and ease of getting the part needed.
Parts Used:
Defrost Heater Harness Kit
  • ASCAP from New York, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Water leaking from the front door
We watched the video on how to install the part. When the part arrived we were all set. The video was so informative that we knew exactly where to go to install and what tools to use. This was great and we have recommended this company to anyone who needs to do repair on their appliances without having to pay for a service call, parts and labor. It cost us approximately $42.00 which other wise would have been easily $200.00 for the GE repair person or another appliance repair person
Parts Used:
WATER VALVE WITH GUARD
  • Kenneth from Hollywood, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Ice maker door was not closing. Snow piled up enough to fall when door was opened.
Turned power off at breaker. Took off front panel on the door. Unscrewed the panel where the electrical parts were plugged in. Then you could unscrew the old solenoid assembly and install the new one. Cleaned around the Ice shute since some mold was there. Put all back together. We watched the video from you tube about 5 times!!
Parts Used:
Dispenser Door Solenoid Assembly
  • Bonnie from Savannah, GA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Started ticking like a bomb and losing coolness
Followed the Parts Select video step-by-step. It was exactly as the video described and took about 5 minutes (though I already had the cover off). Almost a week later and the refrigerator is running fine.
Parts Used:
Main Electronic Control Board
  • Ron from Bowie, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
Ice box freezer
I replace defroste thermostat :i defrost al the ice
Parts Used:
Defrost Thermostat Temperature Sensor
  • GERARDO DE from BROOKLYN, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Socket set, Wrench set
Was this instruction helpful to you?
Thank you for voting!
Refrigerator not cold enough
The repair is a snap, you can watch the video and it will put you on the right path. My story is more about the service that Part Select gave me. I used a small box fan on low as a temporary fix. My model number was worn off from the box wine we store in that particular place. So I ordered the part based on looks, well it was wrong. Called Part Select and we talked, the nice lady on the other end said OH it must be this fan motor. Send us back that one, and I'll get this out too you. I'll credit your account for $7.99, and it cost me $8.99 to ship back the wrong part. Wow, the next day I received the new motor. They sent it overnight! I thought it would be 5-6 days! Unbelievable. I will use this company for any, and all my repairs.
Parts Used:
DC Condenser Fan Motor - 12V
  • Kevin from Ramona, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Clicking sound. Compressor tried to start with each click, but would not start. Temperature display not lit.
The instruction sheet (2-pages) supplied with the main control board were simple to follow. I removed the cover in back, carefully unplugged all the cable connectors, unscrewed the green ground wire, and lightly pinched the four white mounting pins with my fingers to release the old board. I then snapped the new board onto the four white pins, plugged all the cables back in, attached the ground wire under the closest available screw, and closed it up. I did not need to cut any wires. Plugged the refrigerator in and it's been running fine all day. The whole job took less than 10 minutes.
Parts Used:
Main Electronic Control Board
  • Arnold from Hoodsport, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
The temperature in the refreezer and refrigerator was slowly getting warmer although the condensor motor was running continually.
Unplug the refrigerator and remove frozen food, shelving, light and back panel inside the freezer section to expose the cooling coils. The coils were completely iced over. Using a wet dry vacuum to discharge the air toward the coils quickly melted the ice. The trouble shooting section on your website described my problem and I bought both items which were the most common problem. Using the video(s) e-mailed to me when purchasing the parts provided great information regarding details for the repair. After replacing both parts the refrigerator is working great having spent just under $25.00.
Parts Used:
Defrost Thermostat Temperature Sensor
  • gene from Pocatello, ID
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the ESS22XGMDBB
1726 - 1739 of 1739