ESH25XGREBB General Electric Refrigerator - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Flapper on ice chute in door was not seating, causing frost build-up inside the freexer and the chute
Performed repair per the PartSelect on-linevideo. Some posters had said the solenoid could be rusted, so I had ordered one. Turned out to be fine, and I have returned it. I much appreciated the hint from another poster, that it was no longer necessary to pry the escutcheon off the door, and merely pressing inside the outer 2 holes on the bottom of the control panel would suffice. I encountered no complications. Frist problem is gone.
Parts Used:
-
Robert from Fairfax Station, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Freezer wouldn't freeze
With my hands and tools. It was real easy. Now just waiting to see it that was the problem.
Parts Used:
-
Marciano from Phoenix, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Ice Maker augers fins broke.
Need an additional part to complete the job as the new auger is held to the ice crushing blades by a coupling. The new auger screws onto the blades. So I need a new ice crushing blade assembly. To complete the job.
Parts Used:
-
Matthew from Arlington, VA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!