ESH25XGPCWW General Electric Refrigerator - Instructions

It was a tough job to replace the drawer slide rails at the bottom of the refrgerator on both the left and right sides. I had to get on the floor on my knees and stomach to get my head inside trying to see the work to be done. First the screws from the broken drawer slide rails had to be removed. The screws in the front part of the rails were a little easier than those in the middle. (Fortunately, there were none in the back.) The screws are hidden in cylindrical grooves and one can't get its head in far enough to see. The middle ones are extremely difficult when on your kneees and stomach. Using a trouble light inside helped a little. The screws in the middle were really tough especially inserting and starting the turning, both in loosening and tightening. Fortunately, I had long nose snips that allowed me to brarely grab the end of the Philips screws and gently insert them in the grooves. Then with luck in aligning the sacrews. I was able to start the tightening but had to use my left hand on the right side as there was no room for my right hand. The total job took a few hours of struggle but I finally finished the job and it was perfect. If I ever have to do it again, I'll know the procedure better. The completion of this task gave me great satisfaction. I think my description here is probably more than neeeded.

Just as your video described, although due to the age of the fridge, it took a bit longer to remove the defective switch. Your video made this so simple, I can't imagine why we lived with a dark fridge for so long! I was ready to buy a whole new fridge, as repairmen are often nonexistent for small repairs. I am the biggest fan of your company & it's repair video. THANK YOU SO MUCH

Undcrewed broken parts (2 screws each) and replaced with new parts and screwed them back in place,