EF36IWFSS Refrigerator - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
broken drawer lid in refrigerator
-
Dan from Spotsylvania, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Pantry Drawer Broke
I ordered the part, you shipped it quickly and I replaced it. I would absolutely recommend your company to anyone. I was very impressed. This is the second part I have ordered from you.
Parts Used:
-
Joe from Virginia Beach, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
see through lid separated from lid frame
pulled one side loose than the other. did the opposite to install new lid
Parts Used:
-
Thomas from Manassas, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
A piece of a component broke off which held on the draw cover.
First I removed the screws from the draw track and screwed on the track to the new part. I then used a socket wrench to remove the component. Once removed, I used the socket wrench to screw in the new component. Finally I placed the cover back on the draw.
Parts Used:
-
Charles from Medfield, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken hinge on meat drawer lid
First I removed the drawers under the lid and then the drawers over the lid. I also removed the glass shelving and shelf brackets. Then I removed the three screws holding the endcap and then replaced the endcap with a new one. Then I reassembled the shelves and drawers.
Parts Used:
-
John from Montgomery, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Drawer lid was broken/cracked
I slid the drawer lid from the pins by pushing in on the top sides of the lide and put the new one in by lining up the pins and holes and 'snap'.
Parts Used:
-
Yvonne from Haverhill, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken round clasp on end cap, and plastic glass cracked in lid
Most of the time was just removing the food and trays and cleaning up a bit. 3 nuts removed and re attached with a small socket wrench. No wires or anything. The lid then just simply snapped back into place.
Parts Used:
-
Charles from Longmont, CO
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Pin to open and close door broke
I removed the upper two storage drawers and glass shelf then the 3 hex bolts on the endcap and then 2 phillips screws on the drawer retractor. Then I reversed the process for reassembly.
Parts Used:
-
Dar from Shell Knob, MO
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The old support hinge holding a drawer door broke
I had to half emprty the refrigerator, take away a shelf, and the drawer in order to hace access to the bolts. I simply unscrewed the bolts, took the old endcap away and replaced it with the piece I ordered. It was very simple to do.
Parts Used:
-
Rafael from Bethesda, MD
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Pull out draw close top hinge broke
-
Tom from Calabasaa, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken drawer lid
Old part snapped out and replacement snapped right in - extremely easy and fast.
Parts Used:
-
Rudolph G from Verona, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Pantry Drawer window broke
Removed old lid and installed new lid - no tools required.
Parts Used:
-
Helen from Randallstown, MD
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
cracked plexi glass in meat drawer lid
Took off the old one and snapped in the new one! Took less than a minute.
Parts Used:
-
Lisa from Scituate, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Pivot pin snapped off
The repair required that I removed two drawers and a glass panel; removal of three screws completed the disassembly process. The ordered part was delivered without delay, which made the repair almost a pleasure.
Parts Used:
-
Dwight from Clovis, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice getting stuck in icemaker
Removed icemaker found ice mold protective layer coming off. Replaced ice mold and working great. Online graphic very detailed and easy to determine part needed. Easy and great delivery. Highly recommended for future repairs.
Parts Used:
-
Mariano from Miami Beach, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Wrench set
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!