ED5VHEXVB00 Whirlpool Refrigerator - Instructions

Turn off power. Remove freezer shelves. Remove six screws on the back of the freezer. Slide out metal piece. Pop off plastic fan piece. Remove motor mount by squeezing metal bracket. Take off wires... Do reverse... Attach wires to new motor, install motor (may have to also use the clear rubber piece from the old motor which keeps the motor in place). Push fan blade back on. Screw in metal plate, turn on power. Good videos on YouTube as well.

Watched Video - took you through step by step

was really ease remove three scwes fron back panel plus two more screws from the water valve

Very easy - simply turn on the new cap.

with a mirror to see the small hole on the front side of the icemaker.... very simple, took 1 minute

It was this simple. I removed the old drawer and slid the new one in place. I was simply amazed at how quickly I received the part. I ordered it on the 24th of July and received it on the26th.

We logged on looking for a possible cause and solution. We found your website, diagnosed the problem, ordered the part and it came in two days. You even had a step by step video on how to change out the part. Kudos to you. Thank You

I took the tray out of ice maker, removed the screws holding the drum assembly. Dismantling the drum assembly careful as possible and placing the new drum on place of broken one, it still took twice to get it workable. Probably the next time I will follow the instructions a little more closely.

I received the new part and then shut off power to refrigerator. I loosened the two top cap screws with 1/4 inch nut driver, removed the cap screw from the bottom bracket of the icemaker. Then using a small blade screw driver pushed in the clip holding the wiring harness and removed the old icemaker. I had to use existing wiring harness because my harness could not be removed from the refrigerator. I installed the new icemaker by reversing the removal of the old icemaker. I turned on the power and had to wait about 4 hours before it make the first batch of ice. After about 12 hours it made only about two dozen cubes of ice. The old icemaker was making about 4 times that much. I figured the new one should be just as fast as the old one so I called PartsSelect and the lady I talked too was agreeable that the new part should work better so she sent me another one and I installed it but it worked the same way, very slow. I checked and rechecked model numbers and part numbers but could not find anything wrong. I put new part alongside the old part and numbers matched. Only difference was that the old part had a black gear box and the new one was white. I decided I would just have to live with a slower icemaker. Its been almost a week since installing the 2nd new one and the bin is still not full, of course we have been using ice from it. I did not adjust the water inlet screw at all. The ice cubes seemed to be the right size. The ladies I talked to at Partselect were very nice and easy to talk to. I would use Partselect again.

Simply removed the old drawer and inserted the new drawer. I ordered on Monday and the part arrived on Tuesday without paying for overnight delivery. What a pleasant surprise!!!

Pull refrigerator out take off bottom cover. Take off metal strap with pliers easy to do. Pry off relay and overload. Oh yea unplug refrigerator first. Put on new parts done simple fix for anyone. Cheaper than repair man parts 75.00 $ not 300 - 400 .

New part was not needed, when I removed lower closing cam the lower part of the closing cam attachment screw had worked it's self lose. So it just needed to be re-torqued. That took care of the problem.

We suspected the thermostat assembly was the problem. We reviewed the video provided by PartSelect and accessed the thermostat assembly. To ensure the thermostat assembly was likely the culprit, we used a multimeter to test it. We ordered the assembly from PartSelect and were pleasantly surprised at the speedy delivery. Using the same video, we replaced the assembly and put the refrigerator back together. Thank you so much for saving us money we didn't have for the repairman. We will be ordering again soon to repair a leaky waterline and ice maker.

un plug first then locate part to replace.lower left corner facing the back . snap off cover on the compressor unplug capacitor install new one.left of capicitor remove the screw on relay install new one.done

Went to parts select and found diagram of parts then found their page that shows percentages of each part being the cause (very helpful) then I watched video of repair (very, very helpful) and fixed the problem. Your company, PartSelect is the best! Rick