Quick Question!

Have you ever purchased from PartSelect.com before?

http://www.partselect.com/Schematics/Maytag/DQFS7EXG.gif
See part 16 in the diagram
http://www.partselect.com/Schematics/Maytag/DQFS7EXG.gif

Relay and Overload Combination

Compare At

$64.67

You Save

$10.78

Your Price

$53.89
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11749877
Manufacturer Part Number WPW10189190
Manufactured by Whirlpool

This part is both the start relay and the overload. The start relay boosts the compressor, and then shuts off as soon as the motor gets up to speed and the overload provides extra protection against excessive temperatures.

This part works with the following brands: Kenmore, Whirlpool, KitchenAid, Roper, Maytag, Estate.

This part works with the following products: Refrigerator, Freezer.

This part fixes the following symptoms:

  • Will Not Start.
  • Freezer section too warm.
  • Fridge too warm.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.3 / 5.0, 4 reviews What's this?
1-4 of 4
 

45 of 54 people found this instruction helpful

Parts Used:
  • Relay and Overload Combination
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Anna from Lincoln, RI

Our refrigerator and freezer stopped working

I had read on a fix it site that the start device for the compressor on this particular model was known to fail after 3-5 years. When we received the part it looked like something that just plugged into the compressor. My husband unscrewed the panel in the back of the fridge and saw the part on the compressor. He first removed the three wires that it was connected to, and the wires were inside a plug so all he had to do was remove the plug from the start device. He then removed the old start device from the compressor. Plugged in the wire plug into the new start device, and pushed in the new start device into the compressor. There was also another black part plugged into the old start device that he plugged inot the new start device that connected to the compressor. Our freezer and refrigerator starting working. Within a couple of hours our freezer had made ice.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

13 of 15 people found this instruction helpful

Parts Used:
  • Relay and Overload Combination
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Darrell from Hammond, LA

Refrigerator not cooling, water dripping from doors

Water was dripping out of top freezer door and had water under the refridgerator. I could hear a clicking noice from bottom of refrigerator every 3-5 minutes.
After removing back panel, I noticed the fan was running and the clicking seemed to be coming from somewhere around the compressor which was warm. I noticed on the site a simular problem had been submitted. It said to remove the start relay and if it rattled it was bad. I removed two wires from it ( it is connected onto the side of the compressor) then took a small screw driver to pry it away from the compressor. It not only rattled but had tiny pieces falling out. I ordered the part and replaced it in less than 15 minutes total and all is well.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

12 of 15 people found this instruction helpful

Parts Used:
  • Relay and Overload Combination
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: william from shady dale, GA

Stopped cooling,the compressor would come on and shut back off.

pull the fridge out away from the wall and hope you have a long flex water supply hose.remove cardboard cover,oh yea unplug fridge first.unplug wire from the relay.flip the wire retainer off the relay and pry it away from the compressor.pull the 2 prong capacitor off and then reverse the steps to reasemble. skip the middle man at the local appliance shop.i waited 2 weeks for him to get the part and gave up.your reg shipping got it here in 2 days.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

5 of 12 people found this instruction helpful

Parts Used:
  • Overload
  • Relay and Overload Combination
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers
Customer: Paul from Cheektowaga, NY

Not getting cold

The relay and overload went in easy. Too bad that wasn't the problem. I needed a new compressor. Cost - about $500

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-4 of 4

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11749877
Manufacturer Part Number: WPW10189190
Brand Model Number Description
Kenmore10640562010Refrigerator
Kenmore10640563010Refrigerator
Kenmore10640563011Refrigerator
Kenmore10640569010Refrigerator
Kenmore10640569011Refrigerator
Kenmore10641562800Refrigerator
Kenmore10641562801Refrigerator
Kenmore10641562802Refrigerator
Kenmore10641563800Refrigerator
Kenmore10641563801Refrigerator
Kenmore10641563802Refrigerator
Kenmore10641563803Refrigerator
Kenmore10641564800Refrigerator
Kenmore10641564801Refrigerator
Kenmore10641564802Refrigerator
Kenmore10641569800Refrigerator
Kenmore10641569801Refrigerator
Kenmore10641569802Refrigerator
Kenmore10650292010Refrigerator
Kenmore10650293010Refrigerator
Kenmore10650299010Refrigerator
Kenmore10650442900Refrigerator
Kenmore10650442901Refrigerator
Kenmore10650442902Refrigerator
Kenmore10650442903Refrigerator
Kenmore10650443900Refrigerator
Kenmore10650443901Refrigerator
Kenmore10650443902Refrigerator
Kenmore10650443903Refrigerator
Kenmore10650444900Refrigerator