ED2KVEXVQ01 Whirlpool Refrigerator - Instructions

Unplugged Refer...Cleared top shelf...removed screws/covers to expose thermostate and capilary tube...removed old thermostate takeing care to notice how Capilary tube was routed and electrical connection were made (wire color coding)...removed sheath on old capilary tube and installed on new, always making sure to not "kink" tubing...installed new part just as the old one was...plugged refer back in and enjoyed trouble free operation.

Read about others with same problem, Found part on line, Ordered, got in few days, replaced. Now we have ice again.

it took 10 minutes.pulled old ice maker out.Found out the wiring harness was not going to work.swapped the two out.plugged inn and slid new ice maker in place.it's something I should have done months ago.

My parts shoewd up in just two days, the installation only took about fifteen minutes and only required a nut driver. My new icemaker was making ice within the first hour of installing it. I am very sattisfied with the delivery and the icemaker itself. V/R Richard S

Received the part the day after ordering. Appreciated the quick service and repair took less than a minute.

unplug freg.took everything out.pulled out shelves and pulled out back panel.their was my part i had to replace.

It just slid into place, simple at that. Ordered part online, got email with day it was shipped, order details and expected date of delivery. Quick, effiecent , piece of cake.

It is helpful to remove the ice tray shelf, that way you can stick your head into the freezer to actually find the screws to loosen them. Sad to say though, ice maker is only working marginally better that the one I just replaced. Any troubleshooting clues out there??

I was at a loss. Did not know where to find the part. Opened the website and navigated for a minute, then put in part number of the broken piece and the right part popped up! I ordered two and they came to my door in two days, popped into place and fit perfectly! Problem solved, no stress.....what a treat.

got the ice marker in record time, then need to replace old wiring from the new one, the new one did not reach.used a nut driver put it in and cubes golore.thanks parts select great job.

Took the bolts at the bottom of the door off and removed the door. Pried out the old cam and put the new one in. Put the door back on and it works like it is brand new. The fridge is 13+ years old

Followed the video on Parts Select and it was a breeze.

It took longer to get the part than it took to repair the water inlet. The help from the staff was very responsible and the repair direction off of the net very clear and understandable. I order the wrong part and was offered assistance and directed to the correct part than there were no issues but clear sailing.

IT took all of three to five mins after watching you tube video. Three sections to door handle.top annd bottom portions just slide away from center handle.. This will expose four srcews that hold the mids section.. screw out and replace new part and replace four screws. Push the top and bottom covers down and up to get them back in place...zzzz time

Used 1/4 inch nut driver with swivel to remove the part retaining screw. Held new part into place and installed the retaining screw. Challenge was not hitting the level and putting water on me and the floor during installation. Relatively easy installation as long as you have patients.