All Installation Instructions for Electrolux Freezer E32AF75FPS3

Freezer would not keep running and the temperature was too warm.

Followed the sites instructions. Empty the bottom part of the freezer. Remove the screws. Move the panel out of the way. Easily remove the old part and replace with the new. Put the panel and screws back in place. The freezer works.

Parts Used:

Defrost Thermostat

Edmond from Carroll, NH
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

New Frigidaire refrigerator without icemaker

Spent most of the time reading and understanding the instructions. The installation went ok. Relatively easy.

Parts Used:

Ice Maker Assembly with Water Inlet Valve

Donald from Poulsbo, WA
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

installed an automated ice maker to our refrigerator

My husband has never done this type of work and he found it very easy to read the instructions and follow the step by step process. Our only concern is that it should tell you before you begin that it takes 24 hours to produce ice, we thought we had a problem until we read further on into the instructions to find that out.

Parts Used:

Ice Maker Assembly with Water Inlet Valve

Alice from Nokomis, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench set

Was this instruction helpful to you?

Thank you for voting!

The ice maker quit making ice.

I noticed that the two gears weren't meshing together so upon inspection I saw that one of the gears had an inner piece missing making it weak so it kept popping out away from the other great. I ordered the new gear and unscrewed the old one off and put the new one on. So easy. It made Ice beautiful after that

Parts Used: