Models > E32AF75FPS3

E32AF75FPS3 Electrolux Freezer - Overview

Get Parts and Repair Help for E32AF75FPS3

If you know the freezer repair part you need, you can browse the list of all parts on the E32AF75FPS3, or you can search by name or part description. You can also find your part by where it is located on the E32AF75FPS3 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your freezer. We’ve also included any installation videos we have for E32AF75FPS3 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the E32AF75FPS3 [Viewing 5 of 5]

$11.19

Thermostat

This thermostat regulates and keeps the temperature at a constant temperature for the freezer section.

$21.76

Water Inlet Valve

$12.27

Air Filter

$85.07

Door Gasket

This white door gasket is used to seal the freezer door when closed.

$23.91

Evaporator Fan Blade

$4.95

SCREW-SHOULDER

$8.00

Adjustable Leveling Foot - Black

Sold Individually.

$37.43

Evaporator Fan Motor with Wire Harness - 115V

This evaporator fan motor is located in the back of the freezer, and circulates air over the coils. These coils will convert the heat into cool air, which is then circulated.

$29.57

ICE STRIPPER

$5.27

Hinge Mounting Hexagonal Screw

Sold individually.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Broken ice maker

  • Customer: Juan from Miami FL
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 43 of 59 people found this instruction helpful
Unplugged faulty ice maker, removed two screws holding it to the refrigerator and took it out. Reversed the operation with the new ice maker and after a few minutes presto, we have ice. read more

Ice and frost were forming in a frost free freezer

  • Customer: Louise from Ocala FL
  • Difficulty: Easy
  • Time to Complete: 1- 2 hours
  • Tools Required:
  • 21 of 29 people found this instruction helpful
The old gasket was obviously gapping, partially from age and partially from damage during a move. To make the repair, I loosened the screws that are under the gasket and hold it in, but did not remove them. Once all were loose, I removed the old gasket, then starting at the top, ran a thin bead of food grade RTV under the portion of the door that captures ... read more

Was not filling the ice tray full.

  • Customer: Orville from Garland TX
  • Difficulty: Really easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver
  • 16 of 24 people found this instruction helpful
I had put in a new ice maker and it still had the problem, (I needed the Ice maker anyway) I installed the vale and while I was at it I put a five year filter on the water line that went from the value to the Ice maker, it took less than one hours, the ice is making like it did when it was new, I could not be more please at theis time. Thanks for your Intere... read more