DWB1000AWE Admiral Dishwasher - Instructions

Opened lower panel to better locate noise ( ran in drain mode to pinpoint ). Removed lower tray & started taking apart , found the discharge pump housing had broken on the inside. Ordered parts , they came in a few days & put back together. All works fine & it runs quieter than before it broke

simply replaced the ring and the water inlet injector, no tools need on that part of the repair

Go to computer, log onto PartSelect, order part. Two days later, go to mailbox, open package. Go back to computer, log onto PartSelect, watch instructional video on how to install the part. Go to kitchen, do what the video showed you to do. Job done.

Replaced lint screen.

First replaced the door seal, that slowed it down substantially, but not totally. Next replaced inner door foam insulation strip and that took care of it, no more leaks. There was some corrosion evident after I scraped off the old strip, sanded that smooth with emery sandpaper and then installed new strip. Job done!

Watched on site video. Very helpful as it explained how to remove the upper and lower baskets to get at the upper cabinet nut. How to remove the nut and use a socket to compress the retainer rams so they would pass easily through the hole in the spray arm. Retainer nut replacement 1 minute. Removing and replacing baskets in machine another 5 to 10 minutes.

Followed the outstanding video instructions. Your company is fantastic. Your attention to detail, the quick shipment (one day) and video ... stellar! We will be referring your company to all!!! Thank you!!!!

replaced with new gasket and it works great.

Received the parts within two days. Watched the video and it explained everything. Found it hard to believe how easy it would be, and it was very easy. Cleaning up the door in preparation to installing the new gasket took longer than the gasket installation. The gasket just pressed in the channel, frankly I was surprised that the door inner shield did not have to be removed. The water deflector just pulled off and slipped on (probably took 30 secends. Ran the dishwasher a few times, and no leaks. They had cited that the majority of leaks were due to the gasket, and it was right on. Like the dishwasher and can go for another 12 years.

Watched the video ordered the part. It was delivered the following morning. Un screwed the spray arm holder put the spray arm and retainer in the holder then screwed the holder back in the dishwasher.

I think anytime the motor needs to come out of an older dishwasher, it would be wise to replace the main gasket that goes around the motor at the same time.

Well, I haven't gotten the right part yet. I'm such an idiot that I've ordered the wrong part twice now. So, figuring that 3's a charm, I'm going to try to get the right part now. I do have to say that part select has made it amazingly easy to return the parts. And both of the first 2 (wrong) parts arrived within 2 days of ordering. I'm pretty impressed with this company. Now, if I can just order the right part, I can tell you how the installation went!

Took the dishwasher apart, then went the website and found an extra part. The discharge pump housing had broken into two parts. Order the patrs needed, they came in two days and put the dishwasher back together. It was easy with the help of the website and runs like almost new

I pulled the old rubber gasket off put the new one on and then took the back end of a kitchen knife to push it in all around the door to create a solid seal

The spray arm was badly limed up, so I cleaned out the spray holes, inserted the retainer and snapped the arm in place. Works perfectly. Thanks!!