Models > DU1145XTPBA > Instructions

DU1145XTPBA Whirlpool Dishwasher - Instructions

All Instructions for the DU1145XTPBA
451 - 465 of 613
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
New Part to replace broken part
It was very easy to replace the part in the bottom basket of the dishwasher, it was easy to find the part on your website due to the great schematic visuals. Thank you, B. Arias
Parts Used:
TINE-ROW
  • Blanca from San Marcos, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
door gasket torn
Repair was simple. Pulled out the old gasket and pushed in the new one.
Parts Used:
Dishwasher Door Gasket with Strike - Black
  • TRUDY from HARRISBURG, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Melted Rinse Aid Cap due to not in locked position during dishwasher operation.
Ordered Rinse Aid Cap and received the next day. Placed in the dishwasher Rinse Aid Cap position and locked in. A perfect fit.
Parts Used:
Rinse-Aid Dispenser Cap
  • Charles from Louisville, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Top rack of dishwasher not getting water. Chopper blade was kicked off from a piece of plastic that got wedged. Chopper screen clogged.
Checked to see if top spinner was clogged. All ok. Wanted to see if water was flowing from bottom. Checked a video to see how to remove parts to access lower area. Saw the problem immediatley. Clogged Chopper screen due to broken chopper blade. Ordered new chopper assembly and got it in two days. Five minuted to install. Washer works like new.
Parts Used:
Dishwasher Chopper Assembly
  • Christopher from Wayne, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Extreamly noisy Motor
Unhook electrical/water supply, removed dishwasher, flip upside down, Remove wire connector from motor, remove bolt from motor, turn motor and remove, install new motor in reverse process.
Parts Used:
Circulation Pump and Motor
  • Edward from Malvern, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
Replaced Circulation Pump
Pulled Dishwasher out, turned off power. Did not have to disconnect any hoses or electrical, because when I did the original installation, I left plenty of slack, so as to be able to pull it out. Next, tipped it on it's side, unplugged the harness, undid the bolt, turned motor 1/4 turn, pulled it out. To, re-install, just reversed the process. About 1 hour.Followed Excellent instructions on video. Was very impressed with delivery time. Only about 30 hours, from the time I ordered, to receiving part. Reg. ground.
Parts Used:
Circulation Pump and Motor
  • Sanford from Moodus, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
top rack dishes not clean
Estamated time was 15 minutes, it took me about 3 hours because everything was so cake up with detergent. Parts would not move. Video very helpful
Parts Used:
Dishwasher Chopper Assembly
  • Thomas from Moline, IL
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
door leaking in right corner
Ordered the gasket on line. Received gasket in 3 days. Removed old gasket by pulling out in one piece. Pressed the new one in with my fingers and it fit perfectly and now have no leaks. Very easy fix.
Parts Used:
Dishwasher Door Gasket with Strike - Black
  • Clyde from Cleveland, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Old motor making lots of noise. Replace with new one!
Pulled out, put on it's side. Take pump off and put new one on and put all back together. Very easy. Video was helpful also.
Parts Used:
Circulation Pump and Motor
  • Kathy from Northfield, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers, Wrench set
Was this instruction helpful to you?
Thank you for voting!
upper and lower arm not spinning\ not cleaning properly
After inspection I found the rubber seals on the feed tube for the upper rack to be worn. At that point I thought that was it. I ordered the feed tube assembly the upper rack seal and the lower spray arm support hub as the bottom of the existing hub was worn. Installed all parts and same issue. Researched again on parts select and checked food chopper and it was clogged and broke off. Ordered and it works great. About 100.00 for parts and total time 1 to 1.5 hours as I worked on it three times. Down time about one week. This model is a Whirlpool Superba with the closest replacement about 1000.00 Thanks PART SELECT
Parts Used:
Water Supply Tube Spray Arm Seal Lower Spray Arm Support/Hub Spray Arm Seal
  • John from Bluffton, SC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Spinner Clip failed
The service video was great. This is a great product web site and service.... Thank you
Parts Used:
Spinner Kit
  • Jeff from Meridian, ID
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
wanted to update diswasher from black to stainless
Just had to take several screws out of old panel on dishwasher. Used the same screws to put on the new stainless panel. No wires to disturb. Was very easy. Works like a charm. Thank you Parts Select.
Parts Used:
Exterior Door Panel - Stainless Steel
  • Roxann from Springfield, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
track stop broke
put new one in
Parts Used:
Rack Track Stop
  • Denise from Chico, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
rinse aid dispenser leaked
cap was replaced
Parts Used:
Rinse-Aid Dispenser Cap
  • Roger from St. Clair Shores, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
No Power to Dishwasher
I watched the Video that was supplyed with the e-mail and when the part got here I new just what to do and it took maybe 15 min at the most. You saved me over $100.00 from what we had to pay once before for the same problem to a repair man. And now I know where to buy my parts for all my appliances when they fail and with KitchenAid it seems to be quite often.
Parts Used:
Bi-Metal Fuse
  • Deborah from Springer, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the DU1145XTPBA
451 - 465 of 613
Back to Top