Below is a list of all parts for the Whirlpool Dishwasher DU1145XTPBA. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.
This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.
The gasket provides a seal between the tub and the door. The door strike serves as a mechanical actuator for door switch operation and provides door tension for proper seal.
This part is used as a safety device to protect the dishwasher circuit from overload. If the temperature gets to high it will shut off the electrical current to the heating unit in the appliance. Also known as Thermal Fuse.
This cap covers the rinse aid dispenser.
This dishwasher heating element is not designed to heat the water that enters it, but is designed to maintain the heat of the water that enters the dishwasher. It is located on the bottom of the dishwasher and also comes with the 2 washers.
This chopper assembly chops/minces the food particles to prevent clogging of the dishwasher pump.
Used for upper dishrack track.
This assembly is the wheel and the mount for your upper dishrack. Sold individually.
This is also called the 3rd-level spinner. This part works like a little spray arm at the top of your dishwasher.
This part releases the detergent and rinse aid into the dishwasher.
The part functions by spinning the impeller of the circulation pump, which is used to move the water through the spray arms during the wash cycle.
This silverware basket has two blue flip tops and a carrying handle.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2015 , Eldis Group Partnership. All rights reserved.