DU1055XTVS1 Whirlpool Dishwasher - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
silverware Basket Broken
-
Don from Afton, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Rubber gasket worn out; wouldn't stay; white coat
Pulled the old one off and inserted the new one. Any woman can handle this one. :-)
Parts Used:
-
Maureen from Naples, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
Was this instruction helpful to you?
Thank you for voting!
Dishes were not cleaning.
One of the upper rack wheels mounting pegs broke off and fell into the chopper assembly which broke it. It took about 1 hour to figure out how the dishwasher comes apart. The assembly is under the protector cover assembly. To get to this you need a TORX screwdriver. The feed tube assembly is held on by two clips. Rotate it clockwise to free if from the accumulator assembly. Four screws remove this cover and one more screw takes off the protector cover. You remove this cover by lifting it straight up. The whole assembly needed to be cleaned from food particles. It was difficult inserting the new chopper assembly. After a few tries , it finally fit. Putting it back together took only 30 minutes. Cleaning took more than 2 hours.
Parts Used:
-
Richard from Pleasanton, CA
-
Difficulty Level:Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Leak near bottom of door
Watched the "how to" video, then did the job. All in 15 minutes.
Parts Used:
-
John from Bakersfield, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
My rinse aid cap fell out and melted in the dishwasher
My main fear was finding the part and not knowing my dishwasher model without looking it up in the owner's manual. Imagine my joy to find the part color-coded on the website and extremely easy to find!!!
Parts Used:
-
Elizabeth from Lumber Bridge, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
water leak bottom left side
Repair was easy. After readjusting the dishwasher so that it wasn't leaning forward (it still leaked) I replaced the Door Gasket. Pulled one end out about 2 ft and pushed in the new one as I pulled the old one out and pushed the new one in. Came out and went in easy, just used a big screw driver to slighting push the new gasket in to make sure it fit snug. Fit, Form & Function was all correct. Works like a sharm, no more leaks and door does fit snug when closing. All good.
Parts Used:
-
Keith from Roy, UT
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
door gasket torn
Repair was simple. Pulled out the old gasket and pushed in the new one.
Parts Used:
-
TRUDY from HARRISBURG, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Melted Rinse Aid Cap due to not in locked position during dishwasher operation.
Ordered Rinse Aid Cap and received the next day. Placed in the dishwasher Rinse Aid Cap position and locked in. A perfect fit.
Parts Used:
-
Charles from Louisville, KY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Broken mounting bracket.
Removed set screw from spray arm. Removed old bracket from washer basket. Attached new set screw in new bracket. Attached new bracket to washer basket. Done.
Parts Used:
-
Kevin from Timonium, MD
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
door leaking in right corner
Ordered the gasket on line. Received gasket in 3 days. Removed old gasket by pulling out in one piece. Pressed the new one in with my fingers and it fit perfectly and now have no leaks. Very easy fix.
Parts Used:
-
Clyde from Cleveland, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Spinner Clip failed
The service video was great. This is a great product web site and service.... Thank you
Parts Used:
-
Jeff from Meridian, ID
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
wanted to update diswasher from black to stainless
Just had to take several screws out of old panel on dishwasher. Used the same screws to put on the new stainless panel. No wires to disturb. Was very easy. Works like a charm. Thank you Parts Select.
Parts Used:
-
Roxann from Springfield, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
track stop broke
-
Denise from Chico, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
rinse aid dispenser leaked
-
Roger from St. Clair Shores, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
No Power to Dishwasher
I watched the Video that was supplyed with the e-mail and when the part got here I new just what to do and it took maybe 15 min at the most. You saved me over $100.00 from what we had to pay once before for the same problem to a repair man. And now I know where to buy my parts for all my appliances when they fail and with KitchenAid it seems to be quite often.
Parts Used:
-
Deborah from Springer, OK
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!