DGHS2634KE2 Frigidaire Refrigerator - Instructions

per the video..easy installation....unfortunately the temperature did not improve. We still have a refrigerator temp in the upper freezer.....and a "cooler" in the refrigerator section

One screw taken off, part pops out, pop in new part, replace screw ! Done.

watched the youtube video from PartsSelect and was able to remove old water inlet valve easily and install new one with little effort. The hoses on my refrigerator were a bit different than shown in video, but I was able to modify them and it's working just fine now. Thank you PartsSelect !

We needed to first select the correct part number. The diagram furnished at the website was sketchy and incomplete, but thanks to the helpful assistance of your patient customer service rep I was able to correctly identify and place the order for the correct part numbers. Each item arrived in lest than 48 hours using standard shipping charges [5-7 business days] much to my surprise. Disassembly and reassembly was very basic. It took longer to remove the food from the refrigerator shelf and pulling out the drawer than it did to unscrew the part and reassemble it hanging it back on the refrigerator brackets. In all it took less than 15 minutes including the removal and restocking the food back onto the refrigerator shelf. While I am not one to brag about repairing anything mechanical I must admit that this was a real morale boosting operation. Anybody with a screwdriver that is tall enough to reach the shelf and shelf brackets could repair these items. It almost took just as long to fill write this narrative as it did to do the repair. Thanks to the Customer Service Rep, she was very kind and reassuring.

I called the contract repairman recommended by Frigidaire and he came to my home. He told me that the ice container had to be put in a certain way until it locks into position. When he left after telling me it was now fixed, it still didn't work and the auger squealed when activated. I decided to find out why it squealed and found that the back end of the ice maker was cracked and the auger was bound up. I couldn't even turn it with both hands. I got on the internet and was lucky enough to stumble onto PartSelect.com. They showed an Ice Maker Assembly so I ordered it. When it came in I opened the package with my fingers and a knife and shoved it into place. Oh . . . I also snapped it into place where it locked. I guess the repairman knew what he was talking about. . . NOT! It now works great. I love the internet. Errol

Pulled out the old seal by hand. Cleaned the opening. Pressed the new seal in place. The entire process took about five minutes

The new bin I ordered was delivered in one day.I was very impressed. The part just slid right on the door.No tools. Very easy. I'm very pleased.

first copy the explored view of all the parts ' ice maker tray ' then just take it apart slowly you need to get the blades back in the correct order and position thats what the exploded view is for in case you forget then you replace the blade and reassemble , it take a good hour .

Purchased a new ice maker assembly and installed. Very easy

Easy to install (self explanitory)

I replaced broken tray with new one.

Simple replacement. Fit perfectly.

before I started a check and tested the defrost thermostat and the evaporator fan this one was working .a did check the heating coil system with a digital multimeter tested ok, at the end find out that the thermostat was not working. I put a new one. I just notice after few days some frost is on the wall of the freezer side .can some one help I don't know what else to do .can be the defrost timer .but how you test the one on this model. this one electronic thank you