DBLR333EE0WW General Electric Dryer - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Terrible squeaking from the front side of the dryer.
I did not know anything about fixing a dryer beforehand but the Parts Select video was extremely helpful. It matched exactly what I needed to do, from showing me which screws I needed to remove to get inside the dryer to replacing the part. I simply removed the front drum bearing, replaced all four slides (gray and white), and snapped it all back in. It took me less than 30 minutes and probably saved me $100 in repair costs.
Parts Used:
-
Joe from Kannapolis, NC
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
broken handle
new part arrived and had it installed and working in less than 3 minutes.
Parts Used:
-
Ray from Hobe Sound, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Horrible squeaking noise during operation
The only tool used was a phillips head screwdriver. I removed two screws to lift the lid and two more screws to free the front panel, slid off the front panel, and had direct access to all 4 slides, replaced, reassembled, and good as new.
Parts Used:
-
Angelica from Fayetteville, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Noise when drying clothing
Its simple .1 remove the screws in the frnt inside of dryer door ,top of door each side . remove the top of the dryer . set aside . There are two screws on each side inside of dryer ,remove them and the frnt will come off . be careful of the wires .(OH before starting cut the power off to the dryer !)The old bearing just pulls out and the new one slides in easy as that .put the thing back together and it will go like it should and last another 13 years .
Parts Used:
-
Robert from Bruceville, IN
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Bearing Worn Out
Followed the video on your web site.
Parts Used:
-
bobby from clover, SC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Front drum bearing issues
It took longer to watch all 3 instruction videos than it took to actually complete the repair. Great instructions for an amateur do-it-yourselfer. Made my wife love me again!
Parts Used:
-
Jeffery from Mandeville, LA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Dryer runs but does not heat
My dryer would run but not heat and the timer would not advance. PartSelect helped me determine that the heating element needed to be replaced. I have very little experience with appliance repair. I found this to be challenging but well worth it.
Parts Used:
-
Nate from Affton, MO
-
Difficulty Level:Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!