Models > CWEF312FSB

CWEF312FSB Westinghouse Range - Overview

Get Parts and Repair Help for CWEF312FSB

If you know the range repair part you need, you can browse the list of all parts on the CWEF312FSB, or you can search by name or part description. You can also find your part by where it is located on the CWEF312FSB by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for CWEF312FSB parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the CWEF312FSB [Viewing 5 of 5]

$29.16

Bake Element - Push On Terminals - 240V

This bake element is found on the bottom of the oven.

$3.51

Front Drawer Glide

Sold individually.

$3.96

Rear Drawer Glide

Sold individually.

$5.99

Terminal Block Kit

This surface burner terminal block kit comes with interchangeable mounting brackets, ceramic wire nuts, heat shrink protective tubing and wires.

$22.08

Surface Element - 8" - 2600W

This coil element has looped terminal ends.

$21.41

Infinite Burner Switch - 8" - 240V

$105.12

Electronic Clock Timer

This is the electronic clock timer mechanism only. The overlay or touch pad is NOT included. To get the overlay, please use the model# of your appliance to search.

$15.25

Surface Element - 6"

This element has looped terminal ends and comes with a black medallion center.

$26.98

Temperature Probe

$8.08

ANTI TIP KIT

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Oven woudn't heat

  • Customer: David from Shawnee KS
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 485 of 490 people found this instruction helpful
1. Removed two screws, pulled out the element, voltage tested the element and determined it was an open circuit (bad element).
2. Ordered the part from partselect.com
3. Disconnected element, connected the new one, and screwed it back in. read more

Element cracked in two pieces

  • Customer: Michael from Green Bay WI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 506 of 592 people found this instruction helpful
Shut off circuit breaker to stove and collected the tool from the basement. Turned on flashlight. Unscrewed the two hex nuts from the old element/back of the oven. Slid the old element prongs out of the back, exposing the connecting wires. Pulled the connecting wires off of the old element, carefully, so that the connections wouldn't come off of the w... read more

Front slide of bottom drawer broke off.

  • Customer: Jeanette from Alpharetta GA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 459 of 460 people found this instruction helpful
Inserted new slide as directed by video. Very easy and video was very helpful. read more