CSX25GPCCWW Hotpoint Refrigerator - Instructions

Watched the video. Piece of cake, easy as pie.

I followed the video instructions to the letter and it was very easy and a total success. I believe I would have had problems but for thr video demonstration which was very clear and straight forward in a simple manner. Thanks for the prompt delivery of the part and the help installing it.

Disconnected the light at the top, for small access door light, and removed and replaced per the video.

Looked at the instructional video and read previous customer comments. Didn't have to dissassemble rear of freezer door. Access through the front once trim ring and circuit board removed. Could not have done it with out the video/and or previous customer comments. Part was shipped and received immediately. Repairs complete! No more frost developing and plugging ice chute! I especially appreciate the customer comments on how to complete this repair!

All I had to do was remove four (4) screws from the old ice bucket assembly to remove the front cover and attach it with the existing screws to the new ice bucket assembly. It was a very simple repair. Thanks for the expedient delivery and the exact replacement part that I needed.

Noticed hinge cam riser broken in 3 pieces. Took fridg door off, 3 screws on top. 2 screws on bottom loosend one screw and removed other screw. replaced cam riser and reassembled. Wife helped.

It was really simple, remove 4 screws form the old cover and put it on the new bucket. Simple, Simple!!

Repair was exactly as described on U-Tube video. The whole process, including removing items stored on the refrig door, took around 20 minutes and involved only a screwdriver and one socket. Could not have been much easier. Dont know why I delayed fixing what had been a long term annoyance.

exactly as the instructions.......never did see anything about replacing the adapter...therefore i did not

Removed cover from side of compressor. Removed the old switches and replaced with new switches. Still di ot solve problem so I pondered ythe defrost heater parts and replaced them and the refrigerator seems to work fine.

Tested & removed solenoid and found broken piece of crank assembly attached to solenoid. Replaced and re-assembled. Parts delivery was excellent. Ordered parts on Friday, Fedex delivered parts on Sat. That's service!!

MY issue was a old worn out hinge cam on the right side door of our 1993 GE Profile Refrigerator. My repair went great- exactly as depicted in the PartSelect You Tube video: 'Refrigerator Repair- Replacing the Hinge Cam Riser (GE Part # WR02X10140)' Excellent video! Having the PartSelect on line video demo gave me confidence to buy the part and "just do it" to make the replacement. Watching the video confirmed my own assessment of the (very simple) repair procedure, and eliminated my wife's fear that I would remove the 19 yr old refrigerator door and then not be able to put the door back in place! I ordered two WR02X10140 hinge cam parts so I would have a spare. I know we need a new more energy efficient refrigerator, but our GE Profile is still fine for our family. This hinge cam replacement will give my wife more time to make a well researched decision on our next refrigerator purchase! You made me a 'home hero husband'. Great job- Thanks!!!

Followed video. Changing flap was not difficult but did not fix the problem.

Watch online video on how to change icemaker flap! Video was great exactly how to do it, with a link to order the part

Googled how to replace the door seal, ordered parts and replaced the door seal flapper. The video on partselect was not correct for this GE model. However a simple diagran showed you simply remove the control panel directly (pops off) to provide access to the panel. Remove the 4 screws holding the panel, replace the door seal, and reassemble.