CSX22GABCWW Hotpoint Refrigerator - Instructions

per your instructions

This has been a problem for some time and had I known how simple it was to repair, I would have done it a long time ago. I followed the online instruction provided and had it done in under 15 minutes! I removed the upper drawer and shelf, the middle drawer and glass shelf, unscrewed the 2 screws holding the broken slide rail to the side of the refrigerator, applied the new slide rail in place of the old, replaced the glass shelves and drawers and that was it! Works like a charm!

The hardest part was getting hte right replacement drawer.

Several months ago I had to replace the hinge and cam on the refrigerator door and the repair went smoothly as pictured in the video. This time I had to replace the cam on the freezer door so I ordered the hinge assembly, which included the cam. The web site confirmed that, according to the model number of my 27 year old refrigerator, the hinge assembly would fit. The problem I had was that the top hole in the hinge was positioned too high to fit the hole in the refrigerator so I had to put the old hinge back on, even though it showed some wear. The door closes smoothly by itself now.

Took item out of box; removed old broken kick-plate grill with hands; installed new kick-plate grill. Really easy to install snapped right into place.

Pull out old pan,remove the vent cover from front and install it on the new pan, done.

Set up two saw horses to put door on. Unloaded door shelves. removed upper hinge, and lifted door from lower hinge, placed door on horses. changed lower hinge on refrigerator. put door back on lower hinge, and closed door. Put upper hinge back on. Reloaded door shelves. It took more time to Unload, and Load door shelves than to replace Hinge.

Emptied freezes, turned off power, took floor of freezer out [4 screws ], took two screws out of fan mounts and replaces fan. Reassembled by reverse process. Simple

Quick repair ,good service . Well satisfied

First Unplug! then Removed shelves light bulb in freezer removed back panel and themostat right on top pulled off cut wires and butted up to new wires then puched clip back on and replaced everything. Works like a charm now. just as though it was a new one.

very easy. took off back panel in freezer compartment. re moved 4 screws on defrost tubes ,unplugged defrost harness. Assembled in reverse, mounted tubes then routed wires up right side of coils,snapped thermostat on refrigerant line where old one was. plugged harness back together and secured wires and replaced panel and shelves.

Turn off refrigerator.
Empty freezer remove shelves and back plate.
With hair dryer melt ice, I made a tray out of old plastic to drain water to outside into pan outside of freezer, so I would not over fill the drain pan.
Removed to old parts and replaced. Check the wire length to see what one goes on top. I forgot to do this and had to remove and switch them.
Clip on the thermostat and plug in wire. Close back, insert racks and and back in business.
Not a hard repair!

removed door, replaced hinge, replaced door.

This was very easy to do.. :D Even a woman can do it.. :D I did this and it only took me just about 5 minutes.. No problem at all. :D

Gently pry out switch in door jam with screwdriver and pull both connectors off and put connectors on new switch then push switch back into the hole. Looked it up on the internet and video showed how to and also had link to new part, ordered and less than a week later the fridge is bright again. I have an older freezer also and it seems that they all use the same switches. Very Very easy