All Installation Instructions for Hotpoint Refrigerator CSX22DRAAD

Not dispensing water

I watched the video on the partselect website once and completed the repair. Very easy!

Parts Used:

Dual Inlet Water Valve

Anthony from Orlando, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers

Was this instruction helpful to you?

Thank you for voting!

Door would not shut tight

Followed Partselect video on how to replace cam riser. Very, very helpful!

Parts Used:

Door Closing Cam

Peter from Tarrytown, NY
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Socket set

Was this instruction helpful to you?

Thank you for voting!

the old slide broke

when I got on your site I was able to find the part easily & your installation video was a big help. It fit perfectly & was very easy to install--it's working great!!!!!thank you so much

Parts Used:

Drawer Slide Rail - Left Side

darlene from phoenix, OR
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

broken shelf bracket

I watched the you tube video. Very easy! the part was easy to order came earlier that expected and was fixed in less than 5 minutes!

Parts Used:

Drawer Slide Rail - Left Side

Darlene from Delaware, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

broken left siderail

Unscrew 2 screws to remove broken part, screw in new.

Parts Used:

Drawer Slide Rail - Left Side

Thomas from Frederiksburg, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Frezzer would freeze up, refrigerator stayed cold, solved the problem. Now the refrigerator seems to be running more than usual.

Checked the defroster coil which is located behind the rear panel in the freezer compartment, it was still working. Followed the schematics down to the defrost timer, which is located in the lower front of the refrigerator and tried that. Plugged in the new part and the problem is solved.

Parts Used:

Defrost Timer - 120V 60Hz

Henry from West Seneca, NY
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set

Was this instruction helpful to you?

Thank you for voting!

slide fell apart

Ordered part on line, arrived the next day. Looked at the screw (phillips head). Had trouble dropping screws but got our magnetic phillips head and it worked like a charm. So proud of myself as my husband did not have to do a thing.

Parts Used:

Drawer Slide Rail - Left Side

Drawer Slide Rail - Right Side

sandra from Danville, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Refrigerator was only dispensing crush ice and not cubes

Solenoid pushing the crushed ice flapper was burned out. Solenoid was easy to find unplug and replace. I used the old piston which simplified things. Now works great

Parts Used:

Ice Dispenser Solenoid Service Kit

Charles from Spring, TX
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

ice maker was spewing water into freezer

Ordered this part after i replaced the plastic tubes on the back as the problem persisted. loosen the nuts holding the water inlet lines, remove the cover to the valve. remove the valve and the water inlet line to the the valve. Disconnect the 2 outlets from the valve. 1 outlet to icemaker and other outlet to water cooler (bigger). Connect water inlet and 2 outlets to the new valve, test the water lines. Found the inlet is leaking, removed it and added teflon tape and reconnect it. All is done. Then I left the freezer door open for 3 hours to melt the ice on the wrong places and all is well.

Parts Used:

Dual Inlet Water Valve