CSK27PFXDAA Hotpoint Refrigerator - Instructions

I ordered the replacement from you guys, got the new ice maker and the plug had an adapter, but it wouldnt fit in with everything. So I cut the plug off my old ice maker and put it on the new one and it works just fine.
thanks for everthing P.S. i got the ice maker from you for 109.00 and sears wanted 130.00 for it
good stuff good deal.

Removed the two old screws .Installed new drawer slide.

Piece of cake - just unscrew the screws and put the new piece on, replace the glass top and replace the drawer. No brainer. Don't ever pay someone to do it.

removed the screw, replace the screw in new picece. Retighten srcew.

Removed the 2 screws and put in the rail with the 2 screws. It was easy to identify the part on your web site.

I just screwed in the two screws and put the rail in.

Removed remnants of broken grill from refrigerator frame holding the grill and reseated the new grill.

Very very simple. The rail is held in by just two screws. Remove these, remove the old rail, replace with new rail, screw it down! The hardest part is actually getting your head into the space where the drawer goes so that you can see the screws you're removing.

Now, why this thing broke to begin with is a whole other story....but at least fixing it is simple.

My husband took the old icemaker out before the new one came in. When the new one arrived, I installed it in less than 10 minutes.

I removed all items on the shelf that the rail supported. I removed the crisper top and crisper. I removed the 2 screws that held the broken rail and removed the broken rail. I set the new slide rail in place and tightened the 2 srews. Then I reinstalled the crisper and crisper shelf. This was a very simple, easy repair. The most difficult part of the process was identifying the correct replacement rail online.

First i had to remove basket, and then remove the two screws in bracket, and replace with new bracket , it took me about two min. to replace.

Removed the door by removing top hinge. Replaced bottom hinge with cam included.Replaced cam on bottom of door.Reset door and replaced top hinge.Only delay was a shim shipped for the bottom of the door was incorrect.This did delay the repair.Partselect was very good about getting the correct shim to me.Thank You.

Received the part in a couple of days. Replaced drawer slide. Repair completed.

Took off metal brackett, removed plastic frame and installed new plastic frame.

turn off water. turn off electricity. empty freezer section of frozen food. remove ice bucket. loosen two screws holding IM to wall of refrigerator. lift off icemaker, and then unplug it as you remove it. INSTALL new IM by: putting new water funnel onto new IM. attaching adapter cord to IM. plug in IM electrical cord to refrigerator and then hang the new IM onto the two loosened screws on the refrig wall. Now tighten the two screws. the extra adapter electrical cord hangs below the new IM, but does not get in the way when you reinstall old ice bucket. reload food, turn on elec and water. PS. i had a crack in the casing of the new IM, so i got a new one, but that one was cracked too. so i just installed the second cracked one. hope it is not a problem.