Models > CSK24GRXAAD > Instructions

CSK24GRXAAD Hotpoint Refrigerator - Instructions

All Instructions for the CSK24GRXAAD
571 - 585 of 591
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broken Bottom Hinge
Empty all the good stuff stored in the door. Remove top hinge, lift off door. Remove bottom hinge from door and refrigerator, replace with new hinges. Replace door and reinstall top hinge. Very simple. Worst part was removing all the stuff stored in the door then putting it back! My parts arrived very quickly and I'm very pleased with Part Select.
Parts Used:
Bottom Hinge Assembly
  • William from MIDDLE POINT, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Door would not close.
With my wife's help, we emptied the door shelves and removed the door to the kitchen table. The video and instructions for replacing the parts were 100% right. We probably spent more time cleaning the door bottom and gasket than actually changing the hinge assembly! The job went very smoothly and saved us from overspending on a repair to this old fridge, or worse, making a quick decision on buying a new one.
Parts Used:
Bottom Hinge Assembly
  • Daniel from Cherry Hill, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Refrigeratior door of side by side would not close
I viewed a how-to video on partselect.com. I removed all items from the door shelves. Used a screw driver to remove the top "hinge" plate. Used a nutdriver to remove the door hinge plate. Removed door, laid on it's side-hinge side up (if you don't have a helper, lay it on a flat service). Simply removed the broken bottom plate and replaced with new part, and reinstalled on refrigerator. Super Simple!
Parts Used:
Bottom Hinge Assembly
  • Alison from Lincolnton, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Put the part in and observed water leaking from the ice maker which caused the cup to break
Ordered new Ice Maker from you and fixed the problem completely.
Parts Used:
Ice Dispensing Drive Cup
  • John from Ravenden, AR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The girlfriend opened the door and then it wouldn't shut on its own or stay closed
Empty door first then take a phillip heads screw driver and unscrewed the top hinge cover 1 screw. Then used 5/16 nut driver to loosen top hinge from fridge. remove door by lifting and then lay on table to replace the lower washer that is held in by 2 screws and you only need to loosen one all the way leaving one in to align then replace and tighten it up your done.
Parts Used:
Door Closing Cam
  • Gregory from Ontario, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
The ice dispense door flapper was deformed letting warm air into the freezer compartment.
The trim piece covering the opening of the dispenser is the first and most difficult part of the disassembly. Take care when removing this piece that it does not break.
Parts Used:
Dispenser Door Assembly or Flapper
  • David from Kennesaw, GA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Door would not shut tight
Followed Partselect video on how to replace cam riser. Very, very helpful!
Parts Used:
Door Closing Cam
  • Peter from Tarrytown, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Socket set
Was this instruction helpful to you?
Thank you for voting!
actuator pad it was broken
just i took off the actuator and replace with the new one in 8 minutes.It was so easy.
Parts Used:
Actuator Pad
  • JULIO from LOS ANGELES, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Flapper valve allowing frost/ice to accumulate in chute in summer
Followed the online video exactly and it was easily done. Couldn't have been better. The problem is solved.
Parts Used:
Dispenser Door Assembly or Flapper
  • Richard from Dumfries, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
The refrigerator door would not close on its own because the cam was wore out.
I just followed the video instruction supplied by PartSelect and the whole thing was a breeze.
Parts Used:
Bottom Hinge Assembly
  • ANTONIO from LUTHERVILLE, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Freezer door hinge.
Removed freezer door, put a blanket over the opening to keep food frozen. Installed hinge and replaced door.
Parts Used:
Bottom Hinge Assembly
  • Mitchel from Onley, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Pad had worn thru after years of use
the pad is a slip in I just used grease to allow for the friction and had it in with in a minute
Parts Used:
Actuator Pad
  • dennis from Palm Desert, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Refridgerator door was not closing properly
Followed the u tube video that was on the Part select website. Very easy install when following the video.
Parts Used:
Bottom Hinge Assembly
  • Tim from New Berlin, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Icemaker would only make crushed ice, no cubes
I first replaced the ice bucket which allowed the auger to turn but did not fix the problem. I then ordered a new solenoid and plunger and after installing them it now makes ice cubes. Problem solved.
Parts Used:
Ice Dispenser Bucket Ice Bucket Seal Ice Dispensing Drive Cup
  • John from Snellville, GA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
frost formed because the ice damper let warm air into the freezer
Removed frame, unscrewed the electrical panel, and popped the flapper off. Installed new flapper. Replaced the electrical panel and re-installed the frame.
Parts Used:
Dispenser Door Assembly or Flapper
  • jon from social circle, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the CSK24GRXAAD
571 - 585 of 591
Back to Top