Models > CSC27HRAAD > Instructions

CSC27HRAAD Hotpoint Refrigerator - Instructions

All Instructions for the CSC27HRAAD
481 - 495 of 527
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Ice crusher was broken, putting plastic in ice.
Ordered Auger and Ice Bucket Assembly All I had to do was install 4 screws. Worked great. Thanks.Joe
Parts Used:
Auger and Ice Bucket Assembly
  • Joe F. from Kountze, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Broken ice maker replacement
Installing the actual ice maker was quite easy. What takes most of the time is preparing the freezer for the install. Need to remove all shelving, (and the door) to gain access to the unit. The ice maker is simple to install once access is achieved. Putting everything back together takes some time.
Parts Used:
Ice Maker
  • Matthew J from White Plains, NY
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers, Wrench (Adjustable), Wrench set
Was this instruction helpful to you?
Thank you for voting!
Ice maker not making ice
I'm a real novice at appliance repair but learned a lot from this effort. After doing enough online research and watching videos, I diagnosed the problem with my 20 year old ice maker. It was working, just not getting water. So I ordered a new water valve, much cheaper than the part Sears recommended. I easily hooked up the new valve but the old copper water supply line was leaking so I ordered a $7 pex line from Home Depot. Hooked it all back up and now I'm in business, and saved some money too!
Parts Used:
Dual Inlet Water Valve
  • david from raleigh, NC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
No ice.
Piece of cake and now I get loads of ice.
Parts Used:
Ice Maker
  • Jim from Reading, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
ice dispenser was intermittant
replaced the switch that activated the system
Parts Used:
Ice Dispenser Switch
  • Gary from Clarksburg, WV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Frig wasn't cooling as it should.
Followed instructions that came with time, also viewed the video of website.
Parts Used:
Defrost Timer
  • Byron from Murray, IA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers
Was this instruction helpful to you?
Thank you for voting!
Water wouldn't stop running out of tube on door
Repair was really easy, bought the part because of partselect video. Saved myself a lot of money vs calling a repairman.
Parts Used:
Dual Inlet Water Valve
  • Jon from Land O Lakes, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Ice maker went to sleep and forgot to wake up.
Followed the instructions. Smooth as silk. This part is better than the original. There appears to be a sensor that beeps when the ice reservoir is full.
Parts Used:
Ice Maker
  • Harold from Abilene, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
water leaking from cube former
turned water off removed old water valve moved wires to new one moved water supply and discharges to new one reinstalled new valve
Parts Used:
Dual Inlet Water Valve
  • Lee from Deltona, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Wrench set
Was this instruction helpful to you?
Thank you for voting!
Collar that holds Ice auger assemble was Broken.Seems to be a manifacturing defect in this model.
I simply ordered a new Ice bucket, removed about 6 Phillips head screws, removed the old bucket from the Ice door and replaced with a new bucket. SIMPLE !!!!!
Parts Used:
Ice Dispenser Bucket
  • Joe from Paducah, KY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
water manifold cracked
I used the how to video from the site and had the part replaced in about the same time the video did it, even with being distracted with a phone call.
Parts Used:
Dual Inlet Water Valve
  • Jason from Littleton, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
freezer froze up and fridge side got warm
did it just as the video showed. it was a little different, but absolutely nothing that we as ametures could not figure out! very easy and I think it was just the part we needed! biggest thing was unloading refrigerator!
Parts Used:
Defrost Timer
  • Rick from Festus, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Kickplate had been broken for about 5 years, and I was having to use black electician's tape to make it adhere on the one side. The problem is that the tape didn't do the job,
I used black electrician's tape to no avail. I had called the GE rep where I live, and he said it was too old, but come in and he would try to find a part that could work. I decided to go online to GE with the numbers of the refrig. The parts were on their way the same day.
Parts Used:
Kickplate Grille
  • LINDA from MESA, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Icemaker plastic piece had broken causing ice to not make properly and loose water to freeze things into chunks
I spent 15 - 20 minutes just hunting/deciding which of several sets of parts & directions to follow. The provided directions were not bad; but none of them quite matched my GE ADORA side-by-side model. Once I came up with the actions I would need to take...I was done in 5 minutes! The kit , as I said, came with all the parts one could need (and one or two un-needed parts included for other model GE refrigerators) I am very happy with PART SELECT...altough GE doesn't rate as high with me for their declining reliability.
Parts Used:
Ice Maker
  • Paul J from Niceville, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Ice maker not working
I have never repaired anything before but I found your web site ordered the item and received it in 2 days Thank You,thank you
Parts Used:
Dual Inlet Water Valve
  • Patricia from Palmdale, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the CSC27HRAAD
481 - 495 of 527
Back to Top