CREA450ACW Admiral Range - Instructions

Used new plug in coil burner.

Removed stove from slot in wall. Bent rear left leg would not unscrew due to bent metal bracket. Used hacksaw to cut out leg, then straightened metal bracket with small hammer and was able to screw new leg in and adjust height by using level on stove before reinserting stove its slot. Recheck level after pushing back in place and adjust front legs if necessary. If not for bent metal receiving bracket, would have taken much less time. Still easy tho. R'cvd part in two days. Very quick.

Amazingly simple. Removed 2 screws, pulled off 2 wire terminals, removed broken element. Re-attached wire terminals, installed screws.......baked some cookies to reward myself. lol Actually, my girlfriend replaced this part. I just talked her through it. Thanks Partselect. I wasn't able to save you any cookies though.

Turn off power 220v, opened cook top, remove old 8" switch and replace with one of the new switch ps2089438. However, I have another cook top, it is a 6" heating element. Can I use the same switch for 8" and use on a 6" heating element? Since I order 2 new ps2089438 switches. Thank you for your anwser. Kahn lee

The repair was simple and made even easier by the part select web site. I'm very well versed on the web but have never ordered from a site quite like this. Having customers comment on their experiences in the actual use of their purchases is a super idea. I followed the instructions posted by others and found the replacement of the element easy. Thanks for all the input of other do-it-yourself experts.

Compressed the springs and removed the damaged switch, then changed the wiring over to the new switch and press into place, worked fine.

Unpluged oven, removed two screws, pulled out old unit about 6" removed wires. put new unit in oven connected the two wires, carefully pushed it back till mounting brackets lined up with holes replaced screws done. preformed a 400deg test as per repair vidio sugested. Passed.

replaced the heating eliment

Pulled stove out to unplug. Removed screws holding end covers then remove screws on the underside of cover as you face the stove top.Remove knobs.Pull bottom cover forward and up so you can lift it off to see the insides.Remove wires and attach to the new part one at a time. Unscrew old from the front and attach the new one.Put it back together.Done.

i unplugged the stove, waited for it to cool.. took a screwdriver and unscrewed the two screws attaching it to the back of the oven.. unclipped the connectors.. got online, after looking up the serial number and purchased a new one.. the part came in 3 days, clipped the ends onto the connectors, shoved them thru the holes in back of oven, and screwed both of them back into the back of the oven.. and wala, ready to bake!!! yippee! on a sidenote.. we did not use the stove top while the baking element was unattached.. (watch the video) hope this was helpful :)

removed screws slid element out diconnected electric terminals reconnected terminals to new element slid back in replaced screws turned oven on sucess

Just dropped in

Removed heating element, installed new drip pan, replaced heating element. Was amazed at fast delivery - ordered in afternoon, arrived fed ex next morning!

I followed a video on google and once I shut the power off, it took me less than 15 minutes to fix. Saved me atleast $30.00 for a Home Warranty Serv. Charge.

New receptacle element. I am a girl and I did it.!!!!