Models > CG206B C > Instructions

CG206B-C Jenn-Air Cooktop - Instructions

All installation instructions for CG206B-C parts

These instructions have been submitted by other PartSelect customers and can help guide you through the cooktop repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the CG206B-C
1-15 of 96
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

one of the surface burner knobs melted and then cracked

  • Customer: Ronald from Philadelphia PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 459 of 461 people found this instruction helpful
the hardest part of the whole thing was finding the part... partselect.com made it easy. the part was delivery quickly using regular mail, and I was simply able to slide the new knob on.

replaced filter

  • Customer: ELOISE from MILFORD OH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 459 of 462 people found this instruction helpful
pulled old one out , cleaned the area & replaced with the new one.

Old grease filter that I actually did not know I had to change

  • Customer: deborah from fort pierce FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 439 of 519 people found this instruction helpful
Removed the old grease screen and cleaned the entire area thoroughly and replaced the screen

Though the part number was the same it did not fit

  • Customer: Gene from Farmington Hills MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 441 of 525 people found this instruction helpful
The knob neck was 1/4 inches to long. Therefore it could not be used.

Old parts needed replacement

  • Customer: Teresa from Clayton CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 141 of 204 people found this instruction helpful
Removed old knobs and grease filter and replaced with new ones. Excellent service, parts arrived the day after I ordered them. Everything fit perfectly and was just as described on the website. I would certainly use PartSelect again for replacement parts on any listed appliance.

3 out 4 surface burner knobs were broken

  • Customer: Aaron from Elkton MD
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 169 of 315 people found this instruction helpful
Simply pulledoff and threw away the old bad knobs and slipped the new ones on in thier place- four working burners now!

Most amazing thing was I ordered the parts one afternoon and they arrived the very next day.

Also, your site was easy to navigate and find what I was looking for. Many thanks!

My Jenn-Air is an "antique." The filter was disgusting!

  • Customer: marion from aspen CO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 158 of 303 people found this instruction helpful
I had put up with a filter that got more and more raggedy every year, but I thought my 30 yr. old range/grill top was too old for me to find an replacement filter. What a great service you offer. I found you by web-surfing, typed in the model #, and presto--you sent me the shiny new filter. All I had to do was pop it in and throw away the nasty grill (after washing the scent off to keep the bears out of my Colorado garbage.) Thank you!

stem on the dial split, couldn't turn the burner on

  • Customer: Kathy from Bell FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 150 of 289 people found this instruction helpful
threw out the old and slipped on the new dial....

old knobs broken and couldn't turn on burner

  • Customer: Susan from Cherry Hill NJ
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 147 of 287 people found this instruction helpful
Replacement parts fit as suggested by model number (newer parts are a little different but fit fine). Grates look a bit more modern but hopefully will work fine too.
Amazingly fast shipping!

The burner knob brock

  • Customer: Warren from Alexandria VA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 146 of 285 people found this instruction helpful
Went broke purchasing the very simple part through you PartSelect Appliance Parts

broken spindel on knob

  • Customer: Stephen from Bethesda MD
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 145 of 283 people found this instruction helpful
took old off, put new knob on, by hand

Falling apart 20 year old grease filter for downdraft counter rangetop

  • Customer: Roe from Raleigh NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 144 of 286 people found this instruction helpful
Cleaned out the downdraft cove, inserted the new filter, and put old filter in garbage can. Laughing. Thanks. Wish you had a FAQ's hotline. I'd like to know if the radiant inserts fit the older coil-type models.

Knob broke

  • Customer: Peggy from Ellwood City PA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 68 of 132 people found this instruction helpful
pulled it off, went to internet to see if I could find.
Did Find. Ordered and replaced.

cooktop comes with two burners and a grill. I needed 4 burners.

  • Customer: Clifton from Redlinds CA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 20 of 26 people found this instruction helpful
Never really used the grill and needed 2 more burners so I just pulled out the grill assembly and plugged in the burner assembly, added the new pan cover and new grates and viola, I had a four burner stove. Still can pop the grill back in if needed. Much less expensive than buying a whole new cooktop.

fan switch broke

  • Customer: Jill from Potomac MD
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 15 of 16 people found this instruction helpful
I unscrewed the housing unit, pulled out the 2 connectors and here is the hard part, getting the metal washers off the small posts. First I tried needle nose pliers, then I used a rubber mallet to bang it out from the top side far enough to use a reg. hammer to pull it off from the underside. Finally I got it off enough to break the washers with the needle nose pliers. Putting it back together was a breeze,took all of 5 minutes.
All Instructions for the CG206B-C
1-15 of 96