CFD26WIS3 Crosley Refrigerator - Instructions
Sections
Manuals
Parts
Questions & Answers
Symptoms
Videos
Instructions
All Instructions for the CFD26WIS3
Ice maker had stopped crushing ice although it still made cubed ice.
Took out the old ice container assemblyr and put in the new one. No installation was required. Just replaced it in the ice maker housing.
Parts Used:
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 person
found this instruction helpful.
Thank you for voting!
Original ice maker not working leaking water water out door
Removed exterior housing, sliding old unit forward to release. New unit went in easily. Caution wires don't get pinched.
Parts Used:
Michael from FREE SOIL, MI
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
1 person
found this instruction helpful.
Thank you for voting!
A set scew was ordered twice.
The first order arrived in a huge box and there was no scew to be found, the box had wholes in it. I was given a refund and told to order again. The repair did not happen and the set screw which was actually recieved the second time was returned because it was the wrong size.
Parts Used:
Difficulty Level:
Very Difficult
Total Repair Time:
1- 2 hours
1 of 2 people
found this instruction helpful.
Thank you for voting!
ICE WOULDN'T DISPENSE FROM ICE BOX
I read other suggestions trying isolate auger motor shaft with pliers while turning bar drive. needle nose pliers could hold the shaft. bar drive just would spin. so took the whole ice box assembly out (only 2 screws) and with a metal cutting blade used the sawzall to cut along the shaft. freed it up enough to then unscrew it from that point. Left handed threads by the way.
Parts Used:
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
3 of 8 people
found this instruction helpful.
Thank you for voting!
We had a broken bin on one of the doors.
We just slide in the bin.
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 of 2 people
found this instruction helpful.
Thank you for voting!
ice maker is stuck on crushed ice.
We had someone to come and look at it and we were told it was the solenoid valve. The repairman unstuck it for us and said when it does it again, he would have to order the part. We took it upon ourselves to order the part and DIY. We replaced the part that we were told was the problem and "guess what" it's still not fixed. It's still shooting out crushed ice. Will have to call repair guy back out here to see what we did wrong.
Parts Used:
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Screw drivers
2 of 5 people
found this instruction helpful.
Thank you for voting!
No water to the ice maker or water tap.
Removed valve unplugged valve from electric removed water lines from valve and then reverse procedures then turn on water and use.That was it.
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
2 of 5 people
found this instruction helpful.
Thank you for voting!
No problems
I had no problems. Screws arrived sooner than expected. It was a very simple installation. Very pleased with both the product and service.
Parts Used:
Nancy from LEHIGH ACRES, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench (Adjustable)
2 of 5 people
found this instruction helpful.
Thank you for voting!
Freezer Cold, but Refrigerator not Cold
We replaced the damper, but it didn't fix the problem. We then purchased and replaced the thermistor. (We had previously replaced the defrost thermostat). The refrigerator side is now cooling better, but not enough. The damper doesn't seem to be opening. So we have now unplugged the damper and left the opening between the refrigerator propped open and the refrigerator side is now cool enough. (We had previously tried keeping the damper open before we replaced the thermistor and the refrigerator didn't cool off. So the thermistor did fix something, but the damper doesn't seem to have been the problem).
Parts Used:
Debbie from Mount Juliet, TN
Total Repair Time:
15 - 30 mins
1 of 2 people
found this instruction helpful.
Thank you for voting!
clear door bins cracked
slid shelf out, slid new bin in.1 2 3
Parts Used:
Therese from Homer Glen, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 of 3 people
found this instruction helpful.
Thank you for voting!
Install missing door handles on new refrigerator
Read instructions!
Parts Used:
Charles from ALBUQUERQUE, NM
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
2 of 6 people
found this instruction helpful.
Thank you for voting!
The new motor mount screw holes were not threaded.
I had to tap the screw holes with a 8/32 tap so that the screws would not bind.
Parts Used:
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Socket set
0 of 1 people
found this instruction helpful.
Thank you for voting!
loud noise fan blade broke,off balance
take 1/4 hex screws out clean out dust ,remove old fan blade replace with new install bolts .
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
0 of 1 people
found this instruction helpful.
Thank you for voting!
old bin -door was broken
remove the old one and simply placed in the new one.
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Thank you for voting!
water filter needed to be changed
Push in on filter and it releases pull filter out. Slide new one in push in and it locks it. Run water for 2 minutes and it is finished
Parts Used:
Brian from Shady Hills, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Thank you for voting!
All Instructions for the CFD26WIS3