6AMTW5405TQ0 Maytag Washer - Instructions

The video was well made and made repair easy. I like the fact the video also showed how everything went back. The most difficult part and most time consuming for me was putting the washer cabinet or housing back on. I had a hard time lining the sides onto the slot to lock in place....the minor cut on finger sustained during the process was worth it. It saved me from buying a new washer and the whole family are happy that they don't have to wring out the clothes before putting it the dryer. Thank you!

Unplugged the electrical plug and turned off the water. Used putty knife to remove control box. Unplugged the washer lid switch. Used screwdriver to remove clips to washer cover. Removed cover out of the way. Removed clips that hold the drain hose on the washer frame. Used Pliers to open the clip that holds the drain hose on the discharge pump. (You will need to re-use this clip) Removed the bad drain hose. Installed new hose with clip to discharge pump. Clipped in new drain hose to the washer frame. Re-installed washer cover and re-clipped brackets. Re-plugged lid switch and re-installed the washer control box. Turned on the water and energized the washer. Ran a test load and checked for leaks.

We had to take the motor off and find the part that holds the spring, took longer to fix as we are older people and took a brake after every spring. We used YouTube videos to help us I am thankful for this site and cheap prices.

Based on all the other info here, I thought "ah-ha! I need to replace the clutch assembly". So I ordered the part, it came the next day (to Vermont, even!) and started to disassemble the agitator, motor, etc. just as shown in the video. I don't think I would have attempted it if it had not been for the video. It made the process seem very straightforward and easy, as long as you are comfortable using a socket set.

That said, there were some fairly minor differences between my machine and the one in the video, so your repair might differ a little. First of all, I did not need one of those spanners / tub wrenches (whatever they called it in the video-- the thing he hit with the sledge hammer) to take off that nut under the agitator. I didn't need to remove it, and the drive axle just pulled right out. Second, you really don't need to remove the motor mount. Just take the motor off, and then go right to removing the three bolts on the transmission.

Actually, my problem turned out to be NOT the clutch assembly, but the little plastic gear things that go between the motor and the transmission, fitting into that rubber ring thing. I lifted the motor off and one of them was sitting there in pieces! You can easily order this part, and it's even easier to install than the clutch assembly. The plastic pieces are reinforced with metal now, which seems like a good idea.

All in all, this was a fun little project, and now I am under the (probably false) impression that I can repair any problem with washing machines!

Old one fell off in my hands. I just snapped the new one in its place. Super easy. Repairman wanted $43 for the part plus the labor of $39. THe part cost me just $20 with shipping. Thanks!

The old seal had become brittle, cracked and fragmented and would no longer fit in the slot. Without it, washing had become a real mess. I took the new seal and snapped it in within a few seconds and was back up and running again. I looked everywhere for this seal, but this site was the only place I could find it. Thanks for having such a wide range of parts. This inexpensive broken part had made my machine unusuable. If it were not for you, I probably would have to resorted to a Sears appliance technician who would have charged $60 for just showing up.

I removed the torn part which just pulled off of the lid and snapped in the new piece. No tools were needed. I also wanted to add that it was great doing business with Part Select. The part came well packaged, it came in a timely manner, and it was the correct part ! I will try Part Select for any of my future repair part needs.
Thank you

removed the top cover (with all the knobs on it) by releasing the holds in the back
removed the screw holding the lid in place
pinched the snap and removed the part

pinched the snap on the new one and seated in in the hole
screwed in the screw (lol)
turned on the washer

Went on-line for help.found parts select website.referred to your service videos.discovered solution to problem.bought proper part.arrived in excellent condition.watched another video for how to install the part.completed repair in about one hour.washer operating back to normal again. this site is a one stop answer/parts shop. thank you .

the tube when spinning the tub would shake so bad the washer would walk away from the wall but it will not happen anymore since I put the new spring on it runs great and this is not my first rodeo. Removed the outer part to timer controls then removed two screws then shell in front came off the body

went really good, received both parts in less than two days, great service! Video's on line were really helpful and made taking apart and putting back together easier, even though video's were on newer model machines. Would not hesitate to order parts from Part Select again.

First time .Replace the clutch .miss placed one of the retainer clip .found it after the replacement came .It was in the fold at the base of the machine.

Well, after resolving Part Select (PS) shipping issues (PS sent me two refrigerator glass shelves instead of a Tub Spring); And as it turns out they sent me the wrong part for the suspension pads, which I have returned for credit. It takes 3-4 weeks to obtain your credit BTW.

Well after removing the cabinet, agitator, wash basket, plastic tub, all 5 springs, & pump suction line, I was able to access the Tub wear pads and suspension pads. As it turns out the suspension pads looked good.
Thank God, as PS had sent wrong parts. I replaced the wear pads, the 5 springs, and reversed the disassembly process. Took about 6 hours.
But washer works fine now, still vibrates, but does not walk across floor any more.

Seal snapped in

My husband was ready to look for a new machine but since it works so well I decided to look on line for the replacement. Found it. Received it in the mail in three days and I popped it in. Thanks!!!