Models > 61004756 > Instructions

61004756 Maytag Refrigerator - Instructions

All installation instructions for 61004756 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the refrigerator repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the 61004756
16-18 of 18
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

The touch pad on the face of the fridge would not activate the ice or water dispensers

  • Customer: GEORGE from Chapel Hill NC
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Pretty simple really...take out a couple screws and the face plate comes off. Take out the dispenser apparatus behind the face plate and you will see the little lever operated switch that activates the dispensers. Mine had one terminal slightly discolored like it got hot...so that is a good clue. Also, the whole system is pretty simple really, and the switch was clearly the culprit. I got the replacement switch from PartSelect in just a few days, and put it in. The whole deal only takes about 1/2 hour cradle to grave. The dispensers work fine now, and I think I saved at least $150 for a service call. BIG PAPA small

Water continued to flo after removing glass or cup

  • Customer: Peter from Boca Raton FL
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
Turn off power to refrig. Remove front panel of water dispenser/ ice dispenser. Unplug . Remove and replace parts. Reaasemble.

The foam seal on the ice door deteriorated

  • Customer: Dennis from Kansas ity MO
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
The original ice door was deteriorated because of age (12 yrs). This caused humid outside air to enter the ice chute and resulted in a buildup of ice in and around the chute. Ice coming out of the reservoir was impeded and got stuck constantly in the chute. I ordered a new ice door kit and it installed easily. Then I noticed the ice door actuator pad was worn so I ordered that. things are working better now. One thing I learned, If you are replacing parts in a component of a 12 year old refrigerator, replace everything in that component at the same time. Otherwise you will order three different times and pay the shipping fee three times. You learn by experience. PartsSelect was very prompt in sending the parts that I needed. The schematics on the website made it very easy to order what I needed. I just should have ordered everything at once. Next time I will know better. Thanks for what you do.
All Instructions for the 61004756
16-18 of 18