Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 61004756

61004756 Kenmore Refrigerator - Overview

Get Parts and Repair Help for 61004756

If you know the refrigerator repair part you need, you can browse the list of all parts on the 61004756, or you can search by name or part description. You can also find your part by where it is located on the 61004756 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. We’ve also included any installation videos we have for 61004756 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Exact Part matches for your search term

[Viewing 1 of 1]


This part number matches the current model number "61004756".

Sections of the 61004756

[Viewing 1 of 1]
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Ice and Water Dispenser Actuator Pad

Once a glass is pressed against the actuator pad it will cause the dispenser to deliver ice or water when activated.


Ice Chute Door Return Spring

Sold Individually.


Compression Nut - 5/16"


Fountain Bracket Barrier

Wire Harness

This is the wire harness for a refrigerator water dispenser.


This screw is sold individually.







Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

the water dispenser would not shut off quickly

  • Customer: Ludwig from Pleasantville, NY
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers, Wrench (Adjustable)
  • 9 of 10 people found this instruction helpful
Pull out fridge and unplug
Remove drip tray from dispenseer
Unscrew face plate (star bit) 2 screws
Carefully disconnect wire strap from faceplate controls
Unscrew dispenser from chute - 3 screws and one is hddend next to actuator.
Carefully disconnect another wire strap to remove unit.
Remove actuator pad
Remove limit swit... read more

Water dispenser fails to shut off

  • Customer: Lance from Santa Fe, NM
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 6 of 7 people found this instruction helpful
Upon careful inspection, I found that the dispenser also would occasionally fail to shut off when dispensing whole or crushed ice, which led me to think that the problem was in the dispenser actuator rather than in the water solenoid or fountain switch control board. To inspect the actuator mechanism, I shut off power to the refrigerator, removed the escutc... read more

ice and water dispenser sticks

  • Customer: E from Los Angeles, AL
  • Difficulty: A Bit Difficult
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 2 of 3 people found this instruction helpful
The actuator rubber pad had hardened over time so that it wouldn't allow the solenoid to retract and stop the flow. To fix: Turn off fuse to fridge. Removed the screws on fountain faceplate. Remove faceplate. Unscrew fountain computer assembly (2 or 3 screws) to access the actuator pad from behind. Unplugged the computer ribbon. Replace black actuator pa... read more