Models > 5K5SSCWH0 > Instructions

5K5SSCWH0 KitchenAid Mixer - Instructions

All Instructions for the 5K5SSCWH0
166 - 180 of 193
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
head of screw was broken in half
I looked on line found the product sent in information and 3 days later was in my mailbox,great service and ease of ordering. thanks marjorie
Parts Used:
Thumb Screw - Black
  • marjorie from juda, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
A broken part
I went to the web site and had a new part ordered within minutes and received it within a couple days! It could not have been easier!
Parts Used:
Wire Whip
  • Donna from Statesboro, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Gears stripped
Replaced gears and cleaned and re-greased gears
Parts Used:
GEAR-HUB GEAR-HUB
  • Spencer from New Braunfels, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Paint flaking off beater; flakes got into food.
I used the website to find the appliance, but had to call the help number because the model number had one extra 'B'. I was told that this was only for the color (black). Using the chart I found the part number and ordered it. It arrived in about 3 days (regular shipping). No repair was needed beyond snapping the new part in to replace the old one.
Parts Used:
Flat Beater
  • Susan from Los Angeles, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The arm to mixing bowl would not lift bowl
Took the four screws under mix off. Remove old broken part and slip in the new one and rue screw head back on.
Parts Used:
Bowl Lift Arm
  • Don from Cantfeild, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
spring latch bad
easiest fix I ever did Thank You for your fast service and high quality of your products. I will be a repeat customer and recommend you to people I know. Thank You Daniel
Parts Used:
Dough Hook Spring Latch
  • dantirb from CLINTON, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Replaced main gears
1. Removed the mixer from the base by removeing the pivot pin at the mixer base support. 2. removed the retainer ring from the housing. 3. removed the pin from the shaft. 4. removed 5 philips machine screws from the round base. 5. removed the round base from the mixer housing. 6. removed the o-ring from the shaft. 7. removed the shaft and large worm/pinion gear from the shaft. 8. pressed out the pinion drive gear from the mixer. The reverse operation repaired the mixer to new condition.
Parts Used:
GEAR-HUB GEAR-HUB
  • Thomas from Dickson, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
The spring latch had broken.
All that was required was a screwdriver and about 5 minutes. I removed the broken latch and screwed in the new one. Good as new. I am not a mechanical genius, but this repair can be done by about 98% of people.
Parts Used:
Spring Latch
  • Katheryn from El Paso, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
The old wire whip had broken whip strands, and would not work effectivley.
Took the new one out of the box, threw the old one away, and installed the new whip.
Parts Used:
Wire Whip
  • Jeffrey from Michigan City, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
wire whip to kitchen aid was broken
It was easy! I put in the model number for my kitchen aid and it showed a pitcher of it with a different model number but i trusted it and had it shipped to me. It came the next day!! I was so impressed by this. I would definitely order thorough. this company again!!
Parts Used:
Wire Whip
  • patricia from Sidney, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Brushes go in only one way & not same each
Took it to repair shop
Parts Used:
Motor Brush
  • john from las Vegas, NV
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Broken worm gear
Knob fell out of the front of the mixer into the bowl and jammed the beater. This caused the motor to strip the plastic worm gear. Open unit to investigate and found about 4 teeth missing out of the worm gear. Ordered a replacement. Installed the new gear once received in about 30 minutes. Wife is now happy again. Just need to make sure you pack enough gease into the new gear before reassembling the unit.
Parts Used:
Worm Gear
  • Dallas from Atlanta, GA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
mixer would not turn on
removed one screw from back cover, loosened two screws holding speed control plate, removed one wire at a time from old unit to new, screwed two top screws back on mixer,plug mixer back in, adjust speed control screws until I reached correct speed, put back cover back on
Parts Used:
Speed Control Plate
  • John from Norfolk, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Lower Agitator broke as well as speed only worked on fast
Replaced electrical board and speed control plate. cleaned and added new grease. Removed agitator cover and replaced agitator with new. Problem agitator did not match existing. Old agitator was drilled and tapped for a plate to hold gear in place. Tried one without does not work.
Parts Used:
BOARD-PHAS Speed Control Plate Agitator Shaft Transmission Case Gasket
  • Rob from Tomball, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
latch snapped off. Wobble on low speed drive
received parts promptly, opened motor removed three screws installed worm gear . installed brushes external access.Buttoned motor up and tested operation. Very esy to repair with the supplied [correct] parts
Parts Used:
Motor Brush Worm Gear and Bracket Spring Latch
  • Ronald from Tallahassee, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 5K5SSCWH0
166 - 180 of 193
Back to Top