Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS11740846
Used on stand mixers to help keep the bowl in place.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
I unscrewed the spring latch (I could not find a screw driver- so I used a butter knife) I took the new one and screwed it on........the total time took about 2 minutes!The best news was that the parts were delivered in 2 days after ordering!!!!!!!!! Amazing!!!!!!!!!!
Help other customers find the most helpful instructions.
Were these instructions helpful?
Easy off-easy on! Parts were exactly what I needed.
checked online for the part name, called and ordered the spring latch. It came in a couple days and works fine. Many thanks.
As I was using my mixer the spring clip broke off. I immediately went to my computer and googled you. Twenty-four hours later the part had arrived and I installed it by removing two screws, holding the spring in place and replacing the screws. At the same time a repairman was in our home repairing our drier and I felt so empowered by my repairmanship that I nearly asked him to leave!Thanks for your extreme promptness and readable parts chart.
Removed the two screws that hold the bowl spring in place. Removed broken spring. Replaced broken spring with replacement spring. Tightened two screws that hold it in place.
Two flat head screws removed, swapped out the latch, and replaced.The entire repair took about two minutes.Price was acceptable given the worth of the mixer.
changed the part
Take off the old one, put on the new one--start kneadin' bread. Finding a screw driver was the hard part.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.