All Installation Instructions for KitchenAid Refrigerator 4KSRS27QDA00

plastic ice cube guide cracked at the screw attachment.

Found the part on the internet. Checked with Part Select.com to make sure I had the right part. They were very helpful. The part was the right one and it fit perfect.

Parts Used:

Ice Cube Guide

Robert L from Yuma, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Ordered ejector arm.

No instructions with part. Found a picture on line and changed the arm, but it didn't fix the problem. Fairly easy after figured out what needed to be done to get to the part.

Parts Used:

Ejector Arm

Joyce from Springfield, MO
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Wore Out The Auger. Needed Replaced

Did it entirely by myself while my husband was at work

Parts Used:

Ice Bin Auger Drum

Patricia from Saint Marys, PA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set

Was this instruction helpful to you?

Thank you for voting!

Broken wheels on shelf tray

Followed the online video instruction. Super easy

Parts Used:

Meat Drawer Cover and Shelf Frame

Vasiliki from McAllen, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Auger Drum had broken into several pieces and no longer crushed the ice

Took off all screws on box.Removed front of drawer,removed back-up to drawer and auger as one unit. Removed C-clamp on end of auger,this released all the parts. The end of the auger shaft unscrews, remove broken piece and reverse process with new part

Parts Used:

Ice Bin Auger Drum

Connie from Lebanon, OR
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

ice bin bucket broken

removed old parts from bin and installed new bin

Parts Used:

Ice Bucket

GARY from FORESTHILL, CA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Broken ice dispenser arm

Removed 2 screws that holds the lite bracket .removed the 3 screws that holds the arm an water dispenser. The brackets have springs hooked to the one in the middle an right side. Save them . Next take the 2 screws that hold the ice flap, an then remove old arm, put new one on an place door flap screws back in an tighten. Put springs back in an tighten. Kinda hard to hold brackets down but they will go. Saved a lot of money doing it myself for 60 min of repair . Good luck you can do it

Parts Used:

ARM-DISPSR

David from Monroe, MI
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

broken water fill cup

empty frezzer take door off unplug wires going to ice maker unscrew/bolt icemaker replace door take motor cover off ice maker remove screws on motor replace ice cup and put every thing back together

Parts Used:

Water Fill Cup and Bearing

augustine from cedar rapids, IA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers, Socket set

Was this instruction helpful to you?

Thank you for voting!

freezer was freezeing up

unplug freg.took everything out.pulled out shelves and pulled out back panel.their was my part i had to replace.

Parts Used:

Bi-Metal Defrost Thermostat

phillip from palmyra, VA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver

Was this instruction helpful to you?

Thank you for voting!

stoped making ice

took out the old fill tube installed the new one and its working great. I really did not think that was going to be the problem thought it would be more than that but it was not. It took about 7min to change thanks for the fast shipping I will use you in the future.

Parts Used:

Ice Maker Water Fill Tube Kit

Joseph from rolling meadows, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Wrench (Adjustable)

Was this instruction helpful to you?

Thank you for voting!

Broken plastic direct drive drum for ice-maker

My husband and I followed the instructional video on how to replace the "direct drive drum". We took note of how everything looked prior to dismantling the ice bin. We made sure we had the proper tools and a large flat surface to work on and started taking out the screws. Replaced the new drive drum part and put it all back together. The whole process took approximately 30 minutes and the ice crusher works great now. I'm a happy camper!!

Parts Used:

Ice Bin Auger Drum

Kim from Overton, NV
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set

Was this instruction helpful to you?

Thank you for voting!

Refrigerator was getting warm

Unplugged it for a day listened to the ice melting on the inside and plug it in again. Decreased the temperature settings and it now seems to work fine. I will save the part in case I ever need it in the future.

Parts Used:

Bi-Metal Defrost Thermostat

Mack from Los Banos, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Kick Plate Clip Broke

On the left side I unscrewed the screw and replace it with a new one . The right side in had to take s file and file of the rivet. You can use a rivet gun or a metal screw to replaced the clip. Once it is finish open the refrigerator door to see how to line the kick plate into the clip. A piece of cake.

Parts Used: