Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
soap dispenser broke
just put new part in very simple only problem was shipping yall used fedex went to 4 states and one state twice they finally gave it to USPS so it took almost 9 days to get here
Door would not close because the part that was in the door that held it closed kept falling out.
Order the part through PartsSelect. It arrived in a few days and I (an 81 year old woman) replaced it within minutes with no help needed. It was super easy.
Freezer door not closing properly, cam broke at bottom of door
Unplug the refrigerator and turn off the water supply Remove the screws from the freezer top hinge cover and remove it Disconnect all the plugs and the grounding screw that were present under the cover Remove the front bottom grill (under the doors) 3 screws Place the drip pan under the waterline connectors On the freezer side of the connector push the lock into the connector and pull the hoses straight out of the connector Remove the bolts from the top freezer hinge and lift it off Lift the whole freezer door straight up off of the bottom hinge and lay it on a flat surface. Remove the screws from the hinge piece on the bottom of the door and slide it out. Line the new hinge piece up and slide it into place and reinsert the screws. Remove the cam screw from the hinge bottom (still attached to the refrigerator) and remove the can pieces Place the new cam on the hinge bottom and reinstall the screw. The flat side of the cam goes down. Lift the freezer door back into place by lining up the bottom hinge pieces Slide the top hinge back into the freezer top and reinstall the bolts Reinstall the hoses into the connectors on the refrigerator bottom by pushing them in Plug all the connectors together on the freezer top and reinstall the grounding screw Space out the connectors so they will fit under the cover and put the top cover back on. Plug the refrigerator back in and turn on the water supply. Test the water and ice maker then check the bottom connectors for leaks Reinstall the bottom grill and congratulate yourself on a job well done
It went great. First of all, thank you Part Select for the video on how to do this myself. My home warranty company was giving me a hard time. Blah, blah, blah. A mechanic friend of mine referred me to this site. Within minutes I found the part I need and a GREAT!!!! price. Ordered it, got it super fast, fixed it my self and my second hand washer is no longer peeing all over the floor. Very very happy. I will definitely be a repeat customer, hopefully not anytime soon. Thank you again for an amazing experience.
Displayed LE error even with a couple of pair of socks as a load
I ordered the Rotor Assembly and Sensor Assy.. Rotor Assy. was not the problem. 1 - 17mm bolt in the center of the rotor assy. 6 10mm bolts to take off the Stator assy. once you have the Stator assy off, upplug the sensor assy and release the clips on the sensor assy. and remove. Install the new sensor assy. and plug the electrical connection back in. replace the 6 bolts and screw the bolts evenly around the Stator. replace the Rotor Assy. and secure the 17mm bolt. Replace the back cover (4 - philips screws. Do a test load.
Just like it shows on You tube but one of the shocks did not come with the plastic pegs so i used the old one. I need to order the springs now and replace them.
After I watched the repair video for the part, it was a snap. It went exactly as the video described the steps. Hardest part was moving the washer to get behind it.
To fix the problem, I simply removed the top cover of the washing machine by removing the two screws on the back of the machine which allowed me to slide the top back and then I lifted it off. Then I disconnected the hot water hose (after shutting off the valve). Next, I removed the electrical connectors on the old part as well as the hose attached to it and unscrewed the old part and removed it and put the new one on and reattached the hoses and the electrical. It worked like a charm. It took me perhaps 10 minutes total.
