All Installation Instructions for Whirlpool Dryer 3LWED4800YQ0

bellow ripped

After trying to follow a very detailed description by another consumer, we googled our washer and found a site that showed step by step direction that took us through removing all panels and getting to the bellow easily. Not removing the proper panels, we found was making the job hard!I believe the site was applicance services...very helpful! Step by step literally!!Cost of parts through parts select reasonable.

Parts Used:

Lint Filter

Sheila from Tucson, AZ
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Socket set

Was this instruction helpful to you?

Thank you for voting!

I just needed to replace the rack in my dryer

This did not require a "repair", just a replacement. I want to say that the response time and ease of ordering were very good. I would not hesitate to use PartSelect again when needed. Thank you!

Parts Used:

RACK-DRY

Victoria from Sewell, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

needed new lint filter

pulled out old lint filter. Put in new lint filter.

Parts Used:

Lint Filter

Warren from Cedar Falls, IA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Dryer door wouldn't close.

Repair was very easy simply used a screwdriver to remove the cracked old latch and used my fingers to insert my new latch.

Parts Used:

Door Catch Kit

John from Mountain Top, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

One was missing

Popped the panel open & replaced the one that was missing with a new one!

Parts Used:

Single Access Panel Spring Retainer/Clip

Keith W. from Rushville, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers

Was this instruction helpful to you?

Thank you for voting!

Door latch mechanism broke and fell into door

Step 1: remove new latch from bag in which part comes. Step 2: push latch into hole where the other latch was. Step 3: enjoy having a dryer you dont have to hold closed with a folding chair.

Parts Used:

Door Catch Kit

Peter from POTTSTOWN, PA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

felt gasket had come loose!!!!

remove&replace

Parts Used:

Lint Filter

Charles from Phoenix, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Felt liner on lint screen falls out replaced once from Whirlpool

My front- loading dryer is 4 years old and lint screen felt liner never lasted long without falling out. When I received my Part Select I knew the quality surpasses manufacture screen. It is so much better and we are your new customers forever Thank you Cheryl

Parts Used:

Lint Filter

Cheryl from Waukesha, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Felt Strip On Old Filter Came Apart

Just took the old one out and slipped the new one in! That's it! That easy. Thank you!

Parts Used:

Lint Filter

KATHIE from Hopatcong, NJ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Dryer was noisy. Rumbled and squeaked as tub went around.

I highly recommend the videos on this site for repair information. It wasn't exact for the age/model of my dryer but very close. Remove the top panel and then the control panel. Remove the lower front panel and finally the door and main front panel. Unloop the belt from the motor and remove the drum. I found one of the drum rollers was bad, which was causing my problem, but I replace all 4 rollers, the belt, and the idler wheel. Sounds like it did when it was new! Find the video for your model and watch it!!

Parts Used:

Dryer Repair Kit

Dan from Walkerton, IN
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

My lint filter was falling apart

It was all put together... I just switched them!

Parts Used:

Lint Filter

LAURA from Brentwood, TN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

Was this instruction helpful to you?

Thank you for voting!

Washer overflowed

Once I watched a YouTube video showing me how to do the job I ordered the part from you. Am so impressed with your fast shipping and best prices via the Internet. Thank you SO much! The water level switch was easy to install, it ws getting the cover on the washer back on that was hard for me since I am 68 yrs old and have a bad knee. Its why it took me two hours to do what most people could do in 20 minutes.

Parts Used: