Quick Question!

Have you ever purchased from PartSelect.com before?

1609293-1-S-Whirlpool-49621-Leveling Foot
1609293-1-S-Whirlpool-49621-Leveling Foot 1609293-2-S-Whirlpool-49621-Leveling Foot 1609293-3-S-Whirlpool-49621-Leveling Foot http://www.partselect.com/Schematics/Maytag/BMNFZN05.gif

Leveling Foot

PartSelect Number PS1609293

Sold individually.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Noisy.

Compare At

$6.18

You Save

$1.03

Your Price

$5.15
Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.0 / 5.0, 4 reviews What's this?
1-4 of 4
 

10 of 13 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Screw drivers
Customer: Bryan from west valley city, UT

Dryer had no heat, all other functions worked

After replacing the heat element as a guess, (which did not fix it), I measured voltage with a DVOM, found lower cut off switch in op, And thanx to some tips on parts select I ordered the the Thermal cut off kit, fast shipping, installed very easily and all is working properly

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Socket set
Customer: Brian from Spencer, MA

Machine would not agitate properly and noisy dryer

took off fabric softener dispenser. used socket to remove agitator. Cleaned and then replaced the little plastic dog ears...works like brand new! It took 15 minutes or less.

Also repaired noisy dryer. replaced drum rollers, pulley and belt. The job took about an hour and was real simple. However..the dryer was still noisy. Fixed with a prybar to force drum to be tighter. It now sounds like brand new.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Socket set
Customer: Jeannie from Reed City, MI

This dryer still will not heat up.....

And prior to installing all the parts, Thermal Fuse, Cycling Thermostat, High Limit Thermostat, leveling feet, and I even replace the heating element prior to these parts.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 5 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Nutdriver, Pliers, Screw drivers, Socket set
Customer: Raul from channelview, TX

The dryer did not work at all

First removed 8 screws in the back of the dryer to take off the lead 1/4head then removed two blue wires then one screw and you have the thermal fuse . Note: be sure that it is disconected. Before service

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-4 of 4