Models > 3ED22RQXXW00 > Instructions

3ED22RQXXW00 Whirlpool Refrigerator - Instructions

All Instructions for the 3ED22RQXXW00
1126 - 1140 of 1274
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
freezer was not consistent in keeping cold enough to keep itiems from defrosting. Fridge was not keeping up to temp. Noticed compressor would try to cycle but would cut out. Gave a Fonzerelli tap "ehhh" to the temp control and controls would kick on and work for short periods.
Watched the video link from the part order and the step by step instructions were as easy as the repair man showed. This is an easy do it yourself job that will fix the problem I describe with the unit. Ahhh a working freezer making and keeping ice once again.
Parts Used:
Thermostat Assembly
  • Kurt from Staatsburg, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
broken cubes...sticking in mold at times
fridge is about 16 yrs old.....valve sedimented...it gets REGULAR condenser/underside cleanings....working perfectly...OEM valve, went on without modifications. PS...I am an HVAC technician, but it really isn't hard
Parts Used:
Dual Outlet Valve Kit
  • Robert from Lousville, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Wrench set
Was this instruction helpful to you?
Thank you for voting!
No ice
When very smoothly, as the video outlined the procedure.
Parts Used:
Icemaker Control Assembly
  • James from Thorp, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Refrigerator would not dispense ice
I watched a video several time to get the steps in the removal and reinstall. It really was not that hard but first time repairs can take extra time.
Parts Used:
Ice Bin Auger Drum
  • Paul from Fort Worth, TX
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers
Was this instruction helpful to you?
Thank you for voting!
ice maker got out of time water frooze with paddle down in the the ice tried to dump and spin (broke ) the timer gear off
turned off power unscrewed all the screw that mount ice maker, used flat head to release the clip on the wire harness, took out and exchanged the overfill wire, plugged the new unit in at wire harness, lined up and leveled ice maker tighten all the mounting screws, very simple repair i am very happy that you still had the orginal (OEM) ice maker, thanks Herb
Parts Used:
Replacement Ice Maker
  • Herbert from San Antonio, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Ice maker not dispensing correctly
Watched Video - took you through step by step
Parts Used:
Ice Bin Auger Drum
  • Frank from Las Vegas, NV
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Refrig ran and ran with a lot of hot air coming from the back. Temps in freezer and refrig areas would fluctuate with the unit running almost constantly. Discovered the fan was intermittently running, mostly not.
Removed the old fan; cut the wire and spliced in the new fan and reassembled. A little over one hour. Refrig is working perfectly now with lower settings. It is definitely off much more than on now.
Parts Used:
Condenser Fan Motor Kit
  • Donald from Strafford, NH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Socket set
Was this instruction helpful to you?
Thank you for voting!
plastic stopper came off arm
with a mirror to see the small hole on the front side of the icemaker.... very simple, took 1 minute
Parts Used:
ARM-SHUT
  • TinTina from Bruce, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Ice maker stopped turning out ice
Removed three screws. Removed old part. Inserted new part and reinstalled three screws. Doesn't get much easier that
Parts Used:
Icemaker Control Assembly
  • James from Wasilla, AK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
blower motor was going out
just had to remove the fan motor the hard thing is getting down to it
Parts Used:
Condenser Fan Motor Kit
  • Robert from Batavia, OH
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Broken drum
I took the tray out of ice maker, removed the screws holding the drum assembly. Dismantling the drum assembly careful as possible and placing the new drum on place of broken one, it still took twice to get it workable. Probably the next time I will follow the instructions a little more closely.
Parts Used:
Ice Bin Auger Drum
  • William from Petal, MS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Ice maker stopped working
The repair man came out and said the Ice Maker is broken.He said to call him when I get the part but after looking at the video it took 10 minutes to Install. If you can use a screw driver this part is a piece of cake. Oh don't forget to unplug the frig. God Luck John Bronx NY
Parts Used:
Replacement Ice Maker
  • JOHN from Bronx, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
fridge stopped making ice
Removed cover took out 2 screws put in new unit put 2 screws back in put cover on done
Parts Used:
Icemaker Control Assembly
  • Chris from Bethel Park, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Refrigerator/freezer geting warm
We suspected the thermostat assembly was the problem. We reviewed the video provided by PartSelect and accessed the thermostat assembly. To ensure the thermostat assembly was likely the culprit, we used a multimeter to test it. We ordered the assembly from PartSelect and were pleasantly surprised at the speedy delivery. Using the same video, we replaced the assembly and put the refrigerator back together. Thank you so much for saving us money we didn't have for the repairman. We will be ordering again soon to repair a leaky waterline and ice maker.
Parts Used:
Thermostat Assembly
  • Crystal from Buckhannon, WV
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
replace ice maker in refigarator
very easy two small screws, no problems
Parts Used:
Replacement Ice Maker
  • Jimmy from Strong, AR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 3ED22RQXXW00
1126 - 1140 of 1274
Back to Top