3CAP2782BN0 Whirlpool Washer - Instructions

Came with very easy to follow direction and with the web site video was very easy.

Super easy repair for my 20 year old washer. I have a really small laundry room and was worried about how much of an ordeal this would be. I had just enough room to remove the housing and get to the motor assembly without putting the machine on its side. The repair was just as shown in the video; 2 clips for the pump, 2 screws and 2 more clips to separate the motor from the transmission. I installed the new coupling and was doing a load of clothes in less than 30 minutes. Great service, fast delivery and low price. I will be coming back to PartSelect for my next repair.

Started by unpluging and disconnected water hoses.Removed agitator retaining bolt and pulled off. Tipped machine onto a support on it`s front side. Unplugged motor connector and removed drain hoses from pump.Removed the three motor bolts and rotated and pulled out motor and shaft. Removed retaining clip and installed new clutch assembly. Plastic clutch drive looked ok but since it was apart removed retaing clip and changed it too. Slid shaft and motor assembly back into machine and reconnected everything,works like a new one.

Order repair kit, not right kit, so used parts and rebuilt agitator. Works fine now

After watching the video the repair looked easy. I took apart the unit per the video instruction, ordered the part and had the washing machine back up and running in 48 hours. Easy and the wife is happy!

watched video on facebook, and followed the instructions,one of the easies repairs I have had to do in a long time.

Removed auger replaced parts. I had to use the old cam because the part that held the cam dogs in place wouldn't go all the way down. If I had pushed hard enough it may have snapped in. Installed the agitator mounting bolt, cap and seal assembly and the outer auger cap and washed a load of clothes!

removed the aggitater and the replaced coggs, no difficulties at all ,thanx for the very quick parts delivery

Repaired upper Agitator on my whirlpool washer.

Flipped the machine on its front, noticed a pile of black rubber dust, identified where the dust was from. Took some time moving pieces around to get access to the coupling. Finally got it off and saw that 4 of the 6 plastic pins that hold the rubber piece had snapped off. Ordered the part and waited a couple of days (the site said 5-8 days or something but it only took 2). Wife got tired of broken washer spread all over the place but I didn't want to move it until I got the part. It was more challenging to get the part in than it was to take it apart because there's not much room to get your hand where it needs to be. I ended up flipping the machine a few times until I got it where gravity was pulling the motor down, giving me enough access to put the part in. My biggest fear was that the hoses weren't tight enough and that I'd have to take it out again, but it was fine and everything's worked great since.

followed repair instruction,( bought on line and down loaded ) some instructions were unclear but when you have the machine apart its obvious. your parts breakdown helped more than the instructions once the cabinet was opened.

I watched your'e easy to do repair video and it was so easy. I just followed the instructions and it saved me an expensive service call as we live in a rural area. Thank you so much.

Pulled fabric softner container out, Pulled plastic cap out. Unscrew bolt with socket set & lifted aditator assembly out. Replaced the plastic (dog-agitator replacement kit)lower assembly back in to place. Rebolted to based & inserted cap back in place as well as the fabric sofner container. Save $195 from having a Sears service personal come out to fix, my total cost under $20

Super easy repair. Pulled out fabric softener dispenser, looked in and saw teeth were worn off cogs. Looked part up on Partselect based on washer model number, ordered whole kit (just in case I found other parts worn after I took it apart). With shipping it was cheaper than just the part through the store we originally bought the washer from! Ordered kit and 3 days later I had parts in hand! Installation instructions that were packed with the kit werent as clear as ones on website but were still easy to understand. Very pleased with Partselect, and will use them again for future repair jobs!

I unhooked the two motor brackets, dropped the motor down out of the way, separated the coupling into three parts and slid them in place one at a time. I had to tap them a little with the hammer to get them on the shaft. I put the motor back in place and was done. It worked great and took about 20 minutes.