25371822104 Kenmore Refrigerator - Instructions

It was easy. I just slid the new door bin into place. It was the excellent customer service that I received on the phone when I called to find out about getting a replacement part that impressed me. I didn't even know where to look for the model number but the young woman who answered the phone told me where to look and then she found the part I needed and I received it 5 days later and that was that. As painless as could be. I hope you have a record of who it was who helped me so you can give her a raise or at least a compliment. Thanks!

The Hardest Part Was Taking Everything Off The Shelf,Took Old Part Off And New Part Popped In And I Tightened The Screw And That's It Done!Thanks PartSelect!

Followed directions fixed in 10 seconds

ordered new shelf and snapped in on the side. Problem fixed. Easy

I check why not defrost, y test element and tha problem is defrost timer, i ordered and change, that is it. Your intructions that is very nice.Thanks Ben

snapped the wires from frig onto the proper prong and viola,it works. The proper prong is identified by the size because there are two prongs with the wires and two connecting prongs in the socket. I talked to a very helpful representative and she gave me the number for Frigidaire, when I was confused by the placement of the wire. Wish I had remembered her name to share with you. As it turned out I didn't need to call Frigidaire.

I ordered a replacement light switch and read the corresponding instructions. I changed the light switch in minutes with a plastic untensil knife to release the internal clip on the right side of the switch. Simply moving the wires from the bad switch to the new one,pushing it back in place, and the job was complete. The entire job was done without any tools. The other part ordered was a refrigerator door shelf retainer that simply snapped in place.

Part broke on Christmas Eve afternoon. Got online and Googled Frigidaire parts. PartSelect came up. Found the part quickly and easily, and ordered. Part came in Friday after Christmas and snapped right in. No tools, no problem.

removed old rail installed new rail

Watch the video provided by PartSelect and did exactly the same percedure. Shows what screws to remove and how to remove and replace the part. The freezer compartment was iced up quite a bit so defrosted it before installing part.

The instructions given to me by part Select were very good.I replaced the Timer- checked the heater with oham meter it was good- checked the door weather striping it was good and replaced the thermostat with new .So at this point I may need to call a professional unless some one has another solution.

pulled out broken ones and replaced with new ones

I order defrost timer then replaced it but it seemed doesn't work. I order defrost thermostat again then it worked fine until now. Thanks. Part selects.

The two screws that held the ice maker in place could not be seen do to there location. I could only get one hand inside do to space restriction.So I placed a mirror inside so I could see the screw heads and from point it was very easy to see and line up the nut driver on the screw heads. I then lifted it up and unplugged the wiring and installed the new ice maker. Works like a charm. Paul

1st a changed the defrost stat. Waist of time. Realized there was no evaporator above fan. Noticed ice was builing up behind ice maker near fill tube. Found if I shut off ice maker ice wasnt building up on fan. Moved fridge out unplugged fridge unscrewed plastic nut. Turned 90 degrees. Replaced tube locked in place . Screwed nut back on . Plugged in and turned ice maker on. Wife happy ice was back on and no noise.