2535470340A Kenmore Refrigerator - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
replacment of two broken door bins
The bins don't easily snap into place, you have to twist them a little to make them fit into the support nubs. The trick is not to twist them too far or they'll split.Ours do, and now we store half-gallon OJ and milk back where the containers belong.
Parts Used:
-
Nat from North Hollywood, CA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
Was this instruction helpful to you?
Thank you for voting!
Quite making ice
The new inlet valve came with pisco connectors so had to cut the end of the tubes off. Before doing this I marked all the tubes to make sure they were replaced in the correct order. The pisco connectors are great to use and very quick. The total install time was about 20 to 30 minutes. While you have the back of the frig off make sure you vaccuum the fan and coils. It was making ice in less than 20 minutes.
Parts Used:
-
Charles C. from Denver, CO
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Broken freezer door bin
Removes broken bin and installed the new one. No tools needed. Very easy.
Parts Used:
-
John P from Tucson, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Broken rail on meat draw
One screw taken off, part pops out, pop in new part, replace screw ! Done.
Parts Used:
-
Thomas from Flushing, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
filter pvc unit cracked ...water leaked
thought it was the o ring ...summer cottage thought i winterized everything ..ouch filter element cracked three screws a parts direct .com order ....1/4 inch nead screws nut driver or 1/4 inch ratchet ,,in and out and you can re=use the "push=lock" elbows
Parts Used:
-
leon from kennett square, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
ice maker was not making ice, no water flow into.
watched the youtube video from PartsSelect and was able to remove old water inlet valve easily and install new one with little effort. The hoses on my refrigerator were a bit different than shown in video, but I was able to modify them and it's working just fine now. Thank you PartsSelect !
Parts Used:
-
Mary from Mt Pleasant, PA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
When I opened the door, sometimes the light was not turned on.
With the help of a knife we took out the light switch unplugged it, plugged in the new one and it started working.
Parts Used:
-
Helen from Burnsville, MN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Rail slides are made of plastic that broke and peeled like it were a package zip strip.
We needed to first select the correct part number. The diagram furnished at the website was sketchy and incomplete, but thanks to the helpful assistance of your patient customer service rep I was able to correctly identify and place the order for the correct part numbers. Each item arrived in lest than 48 hours using standard shipping charges [5-7 business days] much to my surprise. Disassembly and reassembly was very basic. It took longer to remove the food from the refrigerator shelf and pulling out the drawer than it did to unscrew the part and reassemble it hanging it back on the refrigerator brackets. In all it took less than 15 minutes including the removal and restocking the food back onto the refrigerator shelf. While I am not one to brag about repairing anything mechanical I must admit that this was a real morale boosting operation. Anybody with a screwdriver that is tall enough to reach the shelf and shelf brackets could repair these items. It almost took just as long to fill write this narrative as it did to do the repair. Thanks to the Customer Service Rep, she was very kind and reassuring.
Parts Used:
-
Donald K from Belton, MO
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Original Seal was broken
Pulled out the old seal by hand. Cleaned the opening. Pressed the new seal in place. The entire process took about five minutes
Parts Used:
-
Thomas from Saranac, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
No ice
-
RAYMOND from NEW LENOX, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Bottom bin on refrigerator door was cracked, and fell off.
The new bin I ordered was delivered in one day.I was very impressed. The part just slid right on the door.No tools. Very easy. I'm very pleased.
Parts Used:
-
Camille M. from Branford, CT
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Ice maker not making ice -
I followed the directions from the u tube video. He made it look so easy, but it was quite difficult to locate and unscrew the nuts holding the ice maker to the side of the freezer. I got super frustrated. That is what took the longest. Also got burned when taking out the old assembly as the bottom was hot. Other than that it was pretty simple and the best thing is that I have ice!
Parts Used:
-
Barbara from Somerset, KY
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
the drive blade for ice maker was rusted
first copy the explored view of all the parts ' ice maker tray ' then just take it apart slowly you need to get the blades back in the correct order and position thats what the exploded view is for in case you forget then you replace the blade and reassemble , it take a good hour .
Parts Used:
-
Michael from Philadelphia, PA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
The ice maker quit producing ie
Purchased a new ice maker assembly and installed. Very easy
Parts Used:
-
Tommie from Port Lavaca, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Broken shelves
-
Pamela from Brooklyn, NY
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
Was this instruction helpful to you?
Thank you for voting!