25353612300 Kenmore Refrigerator - Instructions

I pull out the broken part by push the center pin thru and then rerome all the parts. I then positioned the new part in place and push in the center pin to lock. quick and easy.

It was easy. I just pop the shelf into the slots

1) Removed the items from the door.
2) Removed the screw from the top hinge cover.
3) Removed the 2 bolts from the top hinge plate.
4) Lifted the door off the bottom hinge.
5) Removed the broken pieces from the bottom of the door and the lower hinge plate.
6) Slid the new hinge in the hole on the bottom of the door.
7) Greased the area of friction where the hinge rotates.
8) Lifted the door and guided it on the lower hinge post.
9) Greased the top roataing pin.
10) Installed the remainder pieces in reverse.

the new ones clipped in very easily. it took 2 minutes and the shipping from this company was really fast. I ordered on Christmas Day and had the stuff 2 days later. this is, from my experience, a good company.

One screw to remove the old part, and screwed in the new one. Easy as pie. Keep the screw from the old part as the new one did not have one.

Replaced the drawer cover/shelf. Took the door off & put in the new plate....simple.

Replaced broken door shelf bin with new one.

My husband simply removed the hanger and replaced it with the new one. We were irritated we thought we were going to have to purchase a new frig. An easy fix at a great price!

Was the fastest repair I ever did in my life. I intially received the wrong part, but after 1 email I received the correct part the next day! Exchange was easy and with no hassles.

I couldn't find the part I needed online, so I called. The person I talked to was great--and found the exact part I was looking for. It was here in no time & I took it out of the box & popped it in the door of the refrigerator. It was so easy!

With a screwdriver, remove the hinge cover-plate on the top of the door. This reveals the two nut-driven screws that hold th top hinge-plate: remove while children/wife/neighbor/butler/out-of-work-political consultant hold the door. Take out the screw on the Bearing plate and replace with new. (I replaced, but kept the old one. Like to replace parts that ride on each other in pairs, even if there is no noticable wear. Next, take the old Bearing-hinge from the bottom of the door that whomever is holding. Needle-Nose Pliers might be handy if your bearing-hinge is also shredded. Re-assemble being careful to place the bottom hinge into the Bearing without catching or scoring the Bearing hinge. Don't want to do this again in six monthes.
While I was under there with the base/bottom plate removed, I noticed the dust and crud and vaccumed after replacing the door.

Dropped it in!! A two minute fix. No problem.

It snapped in place.

first I removed the old filter housing. With the new part from Parts Select, I simply tightened a few screws then attached our new part, within minutes we were ready to turn the water on. So simple and very pleased with our fast shipment and exact part that we needed. We now have Ice and water, and saved a lot of money by doing it ourselves.

I used the paint spatula to pry out the old part and then put in the new part and pushed in the holder with my fingers. Super easy.