Models > 24488L0 > Instructions

24488L0 General Electric Range - Instructions

All Instructions for the 24488L0
271 - 285 of 342
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Baking element went out in oven
Easy...found the model number, called the number and part was delivered in less than two days! Unscrewed two screws, unplugged two terminal wires put on new element plugging two terminal wires in and screwed two screws in......wahhlaaahhh...EASY!
Parts Used:
Bake Element
  • Chaz from Bethany, OK
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
The Oven Element Burnt Up And Cracked.
It was great to read the other comments about replacing the element part. When I pulled out the wire others said they pull back in to the insulation and you can loose them. So when the yellow wires came out after getting the screws loose I put those potato chip clips on the wires so they would not pull back in and get lost. I certainly didn't want to pull the oven out and go in from the rear. I turned the main breaker off before attempting anything. The screws would not budge till I sprayed them with the wd40. I am a woman and did this with the help of my 19 yr. Old son. The hardest part was removing the screws. Removed the racks and took off the door. This made it easier to reach the screws. It was very easy to replace once we got the old one removed. The part arrived in 3 days from ordering. Excellent customer service. Will use again.
Parts Used:
Bake Element
  • Teru from Colorado Springs, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
Was this instruction helpful to you?
Thank you for voting!
The oven element burned in half
After removing two screws the old part slid out. Removed the electrical connectors. Replaced with new part. Slid part back in the screws were reconnected. Visions of purchasing a new stove disappeared. My wife was thrilled.
Parts Used:
Bake Element
  • Douglas J from Pine River, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
Bake element in oven burned out.
Turned off breaker. Undid two screws. Removed old element from contacts. Connected new element. Slid into place. Screwed in two screws. Turned power back on. Done! Working great at very little time, effort and cost.
Parts Used:
Bake Element
  • Edward from Hampton Cove, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Bake element was burned out
Removed two screws. Unplugged two wires. Removed the bake element. Plugged the two wires into the new bake element. Replaced the two screws. Problem solved.
Parts Used:
Bake Element
  • Mike from Winona, MS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Oven element caught on fire, because of food in the bottom of oven.
Used a nut driver to remove two screws from old burned out element. Replaced the new element you sent. Thanks for the prompt delivery, I received the new part in just a few days.I will remember you the next time I have a problem of that nature.
Parts Used:
Bake Element
  • Dale from Zachary, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Hinge on oven door had a broken pulley.
Very easy job. Removed the 3 screws from the oven body, and slid the hinge out of the door. Slid in the new hinge, replaced the screws, and it was done. Very easy, wish I had done it sooner. Finding the part was easy, using the parts diagram. Rep was nice and confirmed the right part. Shipping was fast, and price was reasonable.
Parts Used:
Hinge with Roller - Left Side
  • James from Denhim Springs, LA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
heating element melted and started to burn
It was as easy as mentioned on the website. The oven works perfectly and I am pleased that I did not need to call a repair person for such a simple repair. The part took less than 2 days to arrive which was amazing. I am very pleased with this company and their service and information.
Parts Used:
Bake Element
  • Margaret from Arnold, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
replace bake lelment
as per inatructions
Parts Used:
Bake Element
  • Joseph from Murrells Inlet, SC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Socket set
Was this instruction helpful to you?
Thank you for voting!
Burnt lower element in oven.
So easy a caveman could do it!!
Parts Used:
Bake Element
  • Len from Huntsville, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
hinge became bent - door unable to open or close properly
The video accompanying the part was very beneficial, making the repair easy and quick. Your online site was concise and organized. The product was easily identified and ordering was clear and secure. From a person with no ability to fix anything, thank you for helping to solve a problem in an manageable and comfortable way. A very satisfied customer.
Parts Used:
Hinge with Roller - Right Side
  • Barbara from Northport, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
Bake Element out in Home Made Oven
Basically a NO BRAINER for an element. The nice thing about PartSelect is they have GREAT PRICING and also you can find parts that are not carried by local suppliers. It only took two days to get the part. Our Bake Oven is actually used for electrical motor rewinds. It is ancient and was designed locally on a smaller scale than a normal bake out oven used in larger repair facilities. THANK YOU PARTSELECT !!!!!!!!!!!!!!
Parts Used:
Bake Element
  • Sue from Greenwood, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
Was this instruction helpful to you?
Thank you for voting!
Knob had broken off
My husband was able to easily remove and replace the switch and know with-in 15 minutes.
Parts Used:
INFINITE HEAT SWITCH KIT
  • DeeAnn from Clinton, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Bake Element burned out
When I ordered the replacement part there was a video on how to remove and replace the bake element. After watching the video with each step explained in simple language and pictures, I knew I could do it.
Parts Used:
Bake Element
  • Lucinda from Allegan, MI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
Was this instruction helpful to you?
Thank you for voting!
Oven Door would not open all the way, due to broken hinges.
I utilized the you tube video installation for instruction. The video was clear and easy to follow along. I was able to pull off the door and replace the the right and left hinges within 10 minutes. The videos made it very simple! Thank you
Parts Used:
Hinge with Roller - Right Side Hinge with Roller - Left Side
  • Scott from Hollywood, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 24488L0
271 - 285 of 342