Models > 24488L0 > Instructions

24488L0 General Electric - Instructions

All installation instructions for 24488L0 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the 24488L0
256-270 of 309
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Bottom bake element burned out

  • Customer: DALE from Grand Blanc MI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
Took 2 screws out.Disconnected element then re-connected new element.Put 2 screws back in.Less then 5 minutes!

no problem

  • Customer: Geneva from High Point NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
i do not repair equipment,but this want very well.thank for the video

HEATING ELEMENT BURNED OUT

  • Customer: Richard from Muncie IN
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
UNSCREWED TWO HEX BOLTS IN BACK, PULLED ELEMENT OUT AND REPLACED THE TWO WIRES ON THE BACK AND REPLACED THE TWO SCREWS

Apparently it was the wrong part, because not only my oven is broken, but my whole stove is broken!

  • Customer: Angela from Swansea IL
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
Just like the directions were writen.

Oven Element burned up

  • Customer: Doug from Chanhassen MN
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
I watched the video on this website and the instructions were clear and correct. The replacement went flawlessly and we were able to bake Christmas cookies and that bought a lot of people happiness.

The left hinge broke

  • Customer: Judy from Black River Falls WI
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
It was really easy, and my only problem was getting the 3 screws out. I just used some WD40 and liquid wrench to free up the screws. After those were out I was in BUSINESS!!! I then just screwed in the 3 screws, and used my needle nose pliers to reattach the spring and WA-LAH!!! Done deal.

bad elements...replaced both broil and bake

  • Customer: Douglas from Hadlock WA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver
  • 0 of 0 people found this instruction helpful
With the nut driver I unscrewed the two nuts holding the element to the back face of the stove..then pulled the element toward the front of the stove exposing the wiring attached to the element. the clip holding the wire and element comes apart very easy...I did it by hand...make sure the wire does not go back in the hole...make a little crimp so as to keep it available...take the new element and attach the wire clip to it and then carefully feed it back through the hole...screw your screws back in and you are done. Both elements are done the same...would also like to say there was great care in packing and shipping the elements...wish all companys would ship with that consideration

Lower element of parents oven out

  • Customer: Christopher from Towaco NJ
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers
  • 0 of 0 people found this instruction helpful
I recently found out my parents oven has not been working for years and they didn't want to spend the money to have it repaired or replaced. They are elderly and live in New Jersey with my brother, who is not mechanically inclined, where as I reside in Florida. I asked my brother the model number of the oven and ordered the part to be delivered to New Jersey. Within a few days the part was delivered and easily installed by my brother in 15 minutes. Years without a oven fixed in minutes.

element burn't out

  • Customer: William from Alvin TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Pliers
  • 0 of 0 people found this instruction helpful
The repair was so easy! If your stove is hardwired, be sure to turn off breaker as power is still going to the stove, even if the stove is turned off! Better yet, turn the power off to the whole house to be safe, then use a flashlight. After removing the two small bolts, pull the old element out, remove the two pull off leads, gently crimp the two leads, then slip them over the new element, push back in and reinstall the two screws. Thats it! Very simple!

oven baking element not working

  • Customer: Brian from Loveland OH
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Socket set
  • 0 of 0 people found this instruction helpful
turn electric off at breaker box . . . you could be electrocuted bt 220 voltage if you do not. Watch video provided by this site. That is all you will need

My Bake Element burned out

  • Customer: Sheldon from Colorado Springs CO
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Pliers
  • 0 of 0 people found this instruction helpful
First, like my father, I have repair genes missing from my DNA. This repair, thanks in part to the video, was exceptionally easy. The only thing that did not work out according to the plan was that my range does not have a separate breaker in my service panel -- I had to use the main breaker. Since I work all the time, I started the repair at night and needed my hands free headlamp. I have a service panel and I plan to have the panel replaced and make sure that the range has its own breaker.

Burner constantly heated

  • Customer: Clifford from New smyrna beach FL
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers
  • 0 of 0 people found this instruction helpful
Good directions

The element was too long. Had to bend the connection progs upward to get them to fit.

  • Customer: gary from floyd VA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Pliers
  • 0 of 0 people found this instruction helpful
Took the back off the oven to get to the connection wires better. Took chanel locks and bent the ends of the element upward to clear the back oven guard

element had burned out

  • Customer: Joy from North Attleboro MA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Socket set
  • 0 of 0 people found this instruction helpful
Undid bolts removed old element and then installed new one .

Range door was hard to open and would not close completely

  • Customer: Roger from Sandy Hook CT
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
I watched the video in the website and in less then 5 minutes replaced the broken hinge with the new one and the door works perfect.
All Instructions for the 24488L0
256-270 of 309