11068082701 Kenmore Dryer - Instructions

Easy to install - 2 minutes

My Daughter and I have the same washer and dryer from Maytag. Her felt piece came apart on the lint filter. I let my fingers do the walking and checked which filter went with the dryer and purchased it. When it got here, I made sure it matched up with the old one and just put it in the dryer where it belonged.

This was by far so easy the instruction Partselect gave me where right on step by step. a repair man was going to charge 75$ just to come out 9$ from partselect. Thank you very much Mike chaplin

I read the instructions on the internet. It told me what to trouble shoot first. The switch on the door then the thermo fuse and after that the thermostat. The off on switch on the door checked ok but the thermo fuse didn't when I followed the instructions on the internet. The thermostat did check ok. When I installed the new thermo fuse the dryer started like always before. I was pretty proud of myself for saving a hundred dollars or more. Thank you for the hlpful instructions.Larry

After reviewing the video of the fellow popping out the old door catch with a putty knife and popping in a new one, I tried that myself and there was no way it was going to come out without applying enough pressure to tear up the finish on the door. Tried the option of compressing the catch vertically with pliers and could get top or bottom out but not both. Believe my I have a garage full of tools and am very handy and this method was not going to work on my dryer. Finally removed the door and laid on carpet, took out all the screws and removed the catch from the back by squeezing with pliers. Replaced with the catch from the other side after doing the same.Re-assembled no problem. Ordered a replacement that I put in the unused side for next time.

Pretty easy to fix, hardest part was having to get the screws out of the inside of the dryer to replace the sensor itself. Once that was done it was pretty quick! PLUS super fast shipping on my part!! Was fixed before any repair places even called me back!!

when I identified the part from the blow-up parts drawing, I followed the instructions from the repair video. Very simple.

I took the old filter out and placed the new one in the same spot.

My experience was a positive one. I called the company and read the part number from kitchen aid and the technician on the other line knew exactly what i needed. He gave me the part number and the price and took care of my order. Within 3-5 days i received my part. I am really happy with this company and i will call again when one of my applicances is not working.

self...right part thank you

ILove your service. The part came in 3 days. Best parts service I have ever found. I was told by the dealer it would take 2 weeks to come in.

Took off front bottom panel reached in removed part that was very dusty. Put in new part. Cleaned out lint inside dryer. Works like a charm.

open dyer door replace lint filter perfect fit, good price, fast delvery. thank you

The door catchh is easily removed by sqweezing the base and pulling out through the opening from where it was installed. The replacemet simply installs in reverse order. There are two such catches on the door. Reversing the catch from the hinge side of the door will help keep you going until the replacement parts arrive. I suggest ordering two replacements and keeping the used parts for temporary use if you should have trouble again.

Took my channle locks and pulled old catch out and snapped in new catch. Works great now. Cost me four dollars and 3 minutes of my time.