11064912200 Kenmore Dryer - Instructions

Used a ropeasround the dyer drum to simulate thebelt to peload the idler This allowed me to get the belt over the motor shaft without the idler sping tenion causing the idler to jump at random timesafer I strted using the rope the belt was on in 10 minutes.

After looking at your video, my brother and I put the belt back on, placed the front and back on and that was it. It required two of us but it went well and the machine is working fine. Thank you.

followed the video instruction

The repair went great. thank you so much. Our dryer works great. It was so easy. We will be using your service again if need be.

I diagnosed and found out that the element string broken, search the web how to fix it and Partselect was the one. I ordered new element part replaced and it running like new. part came in 2 days after i order. I recommend Partselect is #1

took top off,took back off,took lower panel off,removed old motor without taking drum out,got the part # off old motor,looked it up on line then i found the video on how to do the repair...lol. The repair went well and the instructions that came with the new motor were very good as my motor had the old style switch and needed to be rewired. I did go one step further as long as i had it that far apart,I took the duct work apart on the back of the dryer for the vent and I was very glad I did,it had 25 years of lint and all sorts of other thing in it.I cleaned and lubed all other moving parts and reassembled,works and sounds like new !

Slipped screwdriver on top and bottom of catch and pullef out. Pressed new catch in plact. Job finished.

Changing the parts was very easy and took little time to replace all of the parts. I did watch the vidoes that where helpful. Troubleshooting the problem took more time than the repairs

The belt broke at the worse possible time, with a washer full of wet clothing. Watched one of your fine repair videos, did exactly as it said and in less than 15 minutes I had the new belt on and the laundry continued as if nothing ever happened. Thank you for your help and instruction. I will continue to shop your site for all me maintenance and parts needs. Thanks again!

This was the first time that I'd had a dryer apart, so naturally I wound up taking many more things apart than I needed. After finally removing the front panel, I could see that the old belt had broken and was wrapped around the motor shaft, and that the tensioner was lying loose. Installing the new belt was a snap. Simply put it on the lines on the drum and insert into the pulley. The only challenge was figuring out exactly how the tensioner fit. The only way that it could go, and do its job, meant putting a lot of pressure on the spring. Once I got past that hesitation, it was a breeze.

Watch the video on your site and it is very helpful and that is only I needed.

Removed broken element, replaced it with new element, reattached wires.

After watching the repair video that was linked in the part delivery confirmation email, the repair went really easy. I just used the putty knife to pop the lid, then removed two sheet metal screws holding the front panel with the nut driver. I disconnected the two wires from the door switch. The front panel slid right up and out. The old belt was broken and lying at the bottom of the dryer. I ran the new belt around the drum, and around the tensioner and drive pulley. This was not as difficult as I imagined it would be. I spun the drum one revolution to make sure the belt was riding right. Before I put the front panel back on I took the opportunity to clean the lint out of the blower. I then just reversed the front panel removal process and snapped the lid back down. This repair took maybe 10 minutes. If I had to do it again I could probably do it in 5. It's just that easy. The dryer works perfectly now.

Followed video. No problems with installation.Also was a good time to clean the dryer venting.

Found Partselect, went to instant repairman read other peoples comments. I determined that I needed thermal fuse and thermal cut off kit. Ordered the parts early one morning, the parts came the next day. [Thank God!] I was expecting a long 3 to 5 business day wait. I watched the video to install. Took a few minutes to figure out about the jumper wire,[my dryer did not have the small wire] and low and behold, Grandma fixed the dryer saving herself a lot of money she needed to raise grandkids. Thank you so much!