1065730523 Kenmore Refrigerator - Instructions

Unplug refrigerator.loosen 2 screws,take bottom screw out.Unplug electric connector,take off ice arm,install on new ice maker.Reinstall maker.plug in refrigerator.Really easy to install!

disconnected el. power to fridge. pried out broken switch with small screwdriner and pulled out w/water pump pliers. installed new switch and pressed into opening.

fisrt i watched your video loosened two screws removed one removed icemaker installed new one tightened screws had ice in 2 hours i never shut the water off no need

I tried to just replace the cover rather than the whole unit but it was impossible - the cover would not go/stay on. I tried to remove the old unit completely but it would not unplug it was practically fused to the back of the fridge and the liner was cracking. I ended up breaking the cover and jerry rigging it over the bulb to prevent items in the fridge from being able to touch. Bad solution.

I was able to verify that the water inlet valve was ok based on shorting the test points as described in the online ice maker troubleshooting guide. I then ordered the replacement ice maker and received it within 3 days. The repairs went very smooth, remove 3 screws, unplug connector, transfer shutoff wire to new unit, connect power, replace 3 screws. Done. Ice bucket was full within 24 hours.

repair went well. Ice maker still not making ice. UGH

I watched the parts select YouTube video. The repair was a piece of cake. We now have ice again. The part was correct and arrived in just 48 hours. Perfect in every way.

I watched the video and made sure my replacement ice maker matched the original. On my particular icemaker/refigerator combination, the electrical connection was slightly different than what was shown in the video, but the process for removal and replacement was very similar. I believe if more videos were available that were of the quality of the one on this website, there would be more people attempting to replace parts. I believe I saved over $200 by doing it myself. Kudos to the website and video people.

I had ordered some other parts for something entirely different off your website and service was great. So after almost ten years of a dark refrigerator, because of a defective switch, I decided to see if you had the part to fix it... You did and the part got here in 3 days. I had a working light switch and all the light in the world where my husband needed it most (in the fridge). It took me at the most ten minutes to replace the part. All is well now and I have a happy husband who can find the leftovers just fine. Thanks for your great service!

Thought we'd try the Water Valve before replacing the ice maker. Ordered new valve online on Saturday, it arrived on Tuesday. I installed it twice in less than 30 mins. Had a little leak the 1st time, so I uninstalled it, trimmed up the water line with a box cutter and reinstalled without issue. No leak this time. Easy Peasy. My husband said "You're good, you." :)

I followed vidio instructions, took about 15 minutes. Fridge making great ice cubes again. Felt prouud of the repair I did being 70 years old and a female. Thank you

Unplugged refrigerator and shut off water supply. My husband took out the ice cube tray, loosened 2 nuts (?) and took out 1 screw. Removed the old unit. Set in the new unit and tightened the two nuts and replaced the screw. That's it! (Parts arrived in 1 1/2 days!)

First of all the part was not located in the section of the refrigerator that was shown in the video. I wasted a lot of time taking that section apart only to find that the part wasn't there. After some investigation I finally located the defective part. It was behind a piece of sheet metal that had to be bent out of the way to unscrew the part. If I hadn't bent it out of the way, it would have been a major disassembly to remove the sheet metal. Once removed, the installation of the new part was fairly simple. The only confusing thing about the installation was determinig which of the prongs on the part that the internal wire to the new part was to be attached. There were 3 options given and the instructions were not very clear as to which one I should use. Apparently I guessed correctly because the refrigerator seems to be functioning perfectly since the repair.

Take off the old one and maounted the new one and get a lots of ice lol, thanks

We tried repairing with a new switch which was very easy to install but it didn't fix the problem.