Models > 1065730523 > Parts

1065730523 Kenmore Freezer - Parts

All parts for the Kenmore Freezer 1065730523

Below is a list of all parts for the Kenmore Freezer 1065730523. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the 1065730523
1-14 of 315
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$2.52

Light Bulb - 40W

Sold individually.

$108.19

Replacement Ice Maker

***NOTE: Ice maker does NOT come with the bail or shut off arms. Must order them separately if required. It does come complete with flat and round plug wiring harness, the mounting hardware, and the instructions. Its harness can be reused. The ice maker will not fit refrigerators that have the ice auger mounted on the door.

$15.20

Defrost Timer Kit

This eight-hour defrost timer will replace most other defrost timers. This device acts like a clock. It continually advances and alternates between activating the cooling cycle an...

$30.70

Condenser Fan Motor Kit

This condenser fan motor operates in a clockwise fashion and carries carries 2W and 115V. It comes with screws, a blade mounting nut, and a cushion. This part provides forced-air cooling for the condenser coil.

$3.76

Icemaker Water Fill Tube Kit

This kit comes with a fill tube and a compression nut.

$6.98

Light Rocker Switch

$3.56

Water Tube Kit

This tubing is 1/4'' in diameter and comes with 2 inserts. This tubing may be longer than the original, and may have to be cut.

$42.63

Evaporator Fan Motor Kit

The evaporator is found in the back of the freezer. This kit comes with two mounting grommets, two sleeves (not to be used on porcelain models), two #8 mounting screws, and a push-on fan blade.

$2.03

Screw with Washer

This metallic screw is less than an inch long and comes with a plastic washer.

$32.32

Single Outlet Water Valve Kit

The water inlet valve is a solenoid-operated switch located at the bottom of the refrigerator. When it is energized by electrical power, water is released from the supply line through the water valve and into the compact icemaker mold. ***Please NOTE: This part has been redesigned and may appear different than the original. It has a new quick connection. To install: cut the retaining nut off the existing water line and gently push into new valve. To remove: depress the ring that the tube slides into.

$3.96

Compression Nut

$20.10

Light Socket Kit

The bulb is sold separately.

$64.91

Fresh Food Door Gasket

This white fresh food door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.

$30.64

Front Roller - Kit of 2

All Parts for the 1065730523
1-14 of 315